07-08-2022 | #1 |
Join Date: May 2022
Location: Georgia
Posts: 81
|
WTB: 93 corvette wiper blades oem
Wanted original OEM wiper blades ...My 93 ZR1 has 2 mismatched wiper blades and neither of them are original.
Does anyone have an original correct set they could part with ? $ Thanks Bob Last edited by bob@tradeshowconsulting.c; 07-09-2022 at 06:53 AM. |
07-09-2022 | #2 |
Join Date: Feb 2010
Location: Jacksonville,FL
Posts: 240
|
Re: 93 corvette wiper blades oem
Try Mirrock Corvette.
__________________
Gary 90-1572 |
07-09-2022 | #3 |
Join Date: May 2018
Location: VA
Posts: 197
|
Re: 93 corvette wiper blades oem
I contacted Trico and got a set 202 for my 91. I could not find the reply they sent advising the part numbers for c4 corvettes.
These fit perfectly, stop and park as designed. |
07-09-2022 | #4 |
Join Date: Apr 2007
Location: Lake Bluff, IL
Posts: 2,076
|
Re: WTB: 93 corvette wiper blades oem
Often wiper blades are intentionally mismatched, as in one is made shorter than stock, because the OEM ones would often bang together with a very loud scary noise. Mine even did this when they were adjusted correctly per the FSM. Shortening one resolved the issue. Until I bought a shorter one (for I think the driver's side) I really didn't want to use the wipers after the first few times. Afterwards they worked fine. But if you are looking for OEM wipers for NCRS purposes, ignore this. --Bob
__________________
2016 Long Beach Red Z06 #10281 "POPS Z" 1995 Polo Green #409 "WARP TEN"--Haibeck 350/510 package, 4.10s, Hurst, Stock Exhaust with QTP Cutouts --Sold but still running strong 1993 Quasar Blue #161 "HIL KING" --Sold but still running strong, now with more than 120,000 miles 1967 Marlboro Maroon/Saddle Corvette Coupe 300 hp/4-spd --Sold a long time ago ZR-1 Net Registry Founding Member #95 NCM Lifetime Member Favorite Quote--Attributed to Mickey Thompson: "Too Much Horsepower is Almost Enough" |
07-09-2022 | #5 |
Join Date: May 2022
Location: Georgia
Posts: 81
|
Re: 93 corvette wiper blades oem
Yes..Thanks.. I am aware of the Trico and will use the rubber insert/blade. However, I really want the metal blades that are the factory original to the 1993 corvette. I just like to keep everything original. I wont drive it in the rain .so function is not as important as originality of OE parts.
Thanks |
|
|