looking for stock brake rotor thickness measurements F & R - ZR-1 Net Registry Forums

bowtiguy · 04-29-2021

My car came with aftermarket brakes and I'm looking into installing stock brakes for a short period while I get a wheelset made for the car.

Specifically, I'm looking for the rotor thickness AT the mounting point to the Hub face for BOTH front and rear rotors if anyone can put a caliper to a spare pair they have laying around. Thanks!

bowtiguy · 05-03-2021

No one has stock rotors laying around?

Roadster · 05-03-2021

Quote:

Originally Posted by bowtiguy

No one has stock rotors laying around?

Hello bowtiguy.....I do....but they have been resurfaced....my brain is not working at the moment.....so from the hub to the back of the rotor is the measurement you are looking for......correct???

bowtiguy · 05-03-2021

Quote:

Originally Posted by Roadster

Hello bowtiguy.....I do....but they have been resurfaced....my brain is not working at the moment.....so from the hub to the back of the rotor is the measurement you are looking for......correct???

they will work fine. Resurfacing of the braking surface wont effect the area I'm looking for a measurement of.

I'm looking for the thickness of the rotor where it mounts to the hub. Same area where the wheel studs protrude through.

Roadster · 05-03-2021

Quote:

Originally Posted by bowtiguy

they will work fine. Resurfacing of the braking surface wont effect the area I'm looking for a measurement of.

I'm looking for the thickness of the rotor where it mounts to the hub. Same area where the wheel studs protrude through.

Haha.....finally after reading and thinking about this a 1000 times over....lol my brain is working.....the measurement I have is 0.291" that is for the front rotors.....the rear rotors are still on the car......but I would imagine that they would be very close if not the same measurement.....hope this helps...

bowtiguy · 05-04-2021

Quote:

Originally Posted by Roadster

Haha.....finally after reading and thinking about this a 1000 times over....lol my brain is working.....the measurement I have is 0.291" that is for the front rotors.....the rear rotors are still on the car......but I would imagine that they would be very close if not the same measurement.....hope this helps...

Most definitely, thank you sir!

Roadster · 05-04-2021

Quote:

Originally Posted by bowtiguy

Most definitely, thank you sir!

Glad to help out....[emoji16][emoji16]

Sent from my SM-G981U using ZR-1 Net Registry mobile app

04-29-2021	#1
bowtiguy Join Date: Aug 2005 Location: Cali-rodo Posts: 270	looking for stock brake rotor thickness measurements F & R My car came with aftermarket brakes and I'm looking into installing stock brakes for a short period while I get a wheelset made for the car. Specifically, I'm looking for the rotor thickness AT the mounting point to the Hub face for BOTH front and rear rotors if anyone can put a caliper to a spare pair they have laying around. Thanks!

05-03-2021	#2
bowtiguy Join Date: Aug 2005 Location: Cali-rodo Posts: 270	Re: looking for stock brake rotor thickness measurements F & R No one has stock rotors laying around?