No Start read the stickies, clean keys - ZR-1 Net Registry Forums

Young1 · 07-26-2020

I showed Red to a couple friends yesterday then No Start. No crank of the starter. I put a bi pass on the clutch switch, yet no crank. Read the stickies and had no voltage on the fat yellow wire. Read the stickies some more about dirty key pellets. Went and got my other brand new key. Viola!!! I cleaned the original key in alcohol and shot it with some air and it now works. Read the stickies gentlemen and keep it simple. Everyone go and clean your keys today.
PS my security light was on too to give me a clue.

Ccmano · 07-26-2020

Quote:

Originally Posted by Young1

I showed Red to a couple friends yesterday then No Start. No crank of the starter. I put a bi pass on the clutch switch, yet no crank. Read the stickies and had no voltage on the fat yellow wire. Read the stickies some more about dirty key pellets. Went and got my other brand new key. Viola!!! I cleaned the original key in alcohol and shot it with some air and it now works. Read the stickies gentlemen and keep it simple. Everyone go and clean your keys today.
PS my security light was on too to give me a clue.

Congrats! Always best to eliminate the simple things before assuming the worst. There's a wealth of information at our finger tips.
H

Paul Workman · 07-30-2020

I have found some electronic (spray) cleaner too will help, if nothing else to prevent or retard further oxidation which is/was likely the primary issue along with key contact wear.

Justa thought!

BigJohn · 07-30-2020

Dielectric grease will help prevent corrosion of electrical connectors.

07-26-2020	#1
Young1 Join Date: Sep 2016 Location: Ocala, FL Posts: 894	No Start read the stickies, clean keys I showed Red to a couple friends yesterday then No Start. No crank of the starter. I put a bi pass on the clutch switch, yet no crank. Read the stickies and had no voltage on the fat yellow wire. Read the stickies some more about dirty key pellets. Went and got my other brand new key. Viola!!! I cleaned the original key in alcohol and shot it with some air and it now works. Read the stickies gentlemen and keep it simple. Everyone go and clean your keys today. PS my security light was on too to give me a clue. __________________ Steve Young 1991 ZR-1 Quasar Blue Metallic/Black #729 Second Owner 1991 ZR-1 Dark Red Metallic/Black #2040 SOLD 1990 ZR-1 Dark Red Metallic/Saddle #1670 SOLD Double your happiness.....complain half as much.

07-30-2020	#3
Paul Workman Join Date: Nov 2007 Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri Posts: 6,493	Re: No Start read the stickies, clean keys I have found some electronic (spray) cleaner too will help, if nothing else to prevent or retard further oxidation which is/was likely the primary issue along with key contact wear. Justa thought! __________________ Good carz, good food, good friendz = the best of timez! 90 #1202 "FBI" top end ported & relieved Cam timing by "Pete the Greek" Sans secondaries Chip & dyno tuning by Haibeck Automotive SW headers, X-pipe, MF muffs Former Secretary, ZR-1 Net Registry Last edited by Paul Workman; 08-01-2020 at 07:40 AM.

07-30-2020	#4
BigJohn Join Date: Feb 2012 Location: Ledyard,CT Posts: 8,223	Re: No Start read the stickies, clean keys Dielectric grease will help prevent corrosion of electrical connectors.