Location of Clutch Start Relay

[Dynomite]

Originally Posted by Paul Workman

2) Bypass the clutch safety switch (with a jumper or solder join the leads together). This modification eliminates the (nanny) safety switch resulting in the starter being activated with the ignition switch alone. One must either press the clutch when starting the engine unless the transmission is in neutral. Otherwise, the car will lurch when the starter engages creating a potential hazard; a hazard increased if the engine starts as well!

Post 293 - Bypassing Clutch Safety Switch

Many of us are much more familiar with standard transmissions not having a Clutch Safety Switch

You can actually install this Clutch Safety Switch Bypass on the road if you have the 3" Electrical Bypass made up as a spare and a 7mm socket (1/4 inch socket wrench)