Snap On Scanner MT 2500 - Did I score well? - ZR-1 Net Registry Forums

Young1 · 03-29-2020

ED7E7E86-8492-4202-98B8-4162D3D94F51.jpeg

I received this scanner with my project Z. The General Motors reference manual is ninth edition November 1998. It has four GM/Chrysler/Ford/Jeep cartridges and plenty of connectors. It has a connector labeled GM-1. Can I assume this scans OBD1? I will be on a steep learning curve here. How did I do?

Corvette95 · 03-30-2020

Personally, not a fan, but it may work for you. I use a Tech1A and Tech2 . Depends on the price you paid.

Young1 · 03-30-2020

It was included with the Z I bought so no real cash outlay.

32valvZ · 03-30-2020

Quote:

Originally Posted by Young1

It was included with the Z I bought so no real cash outlay.

Exact same way I got mine... Its a complete kit as well. Just havenet needed to use it yet, (thank God)....

tpr60 · 03-30-2020

I have had one for years, works good. Little hard to navigate, need to use the reference manual a lot. If you can find a black plastic later cartage it will have the latest years in it.

Paul Workman · 04-03-2020

I snagged one off of ebay, but it didn't have the modules or a manual. But, if someone can point me to which (and where maybe??) modules I need, it sure would be appreciated!

I have an old AutoXray unit that works quite well - another ebay find some 18 years ago when I bought my first C4. But, I worry about not having a backup. OR, I might pass it forward to someone if I could get the Snap On working.

Suggestions??

Young1 · 04-04-2020

Move to Ocala Paul. We can work on it together. Housing is cheap. No state tax. Taxes are low. Cost of living is low. And the temps are not!

Mystic ZR-1 · 04-04-2020

Quote:

Originally Posted by Young1

Move to Ocala Paul. We can work on it together. Housing is cheap. No state tax. Taxes are low. Cost of living is low. And the temps are not!

...and, you can visit the Don Garlits Museum!!!!

https://garlits.com/

32valvZ · 04-04-2020

Hooked mine up to the car today just to check it out. Pretty decent amount of diagnostic capability. Went for a drive to see how things worked. Figured out the tach is off by about 150 rpm (tach reads high) Coolant temp reads surprisingly accurate on the gauge. Oil temp looks to be reading a hair low on the gauge. Fans come on at 208*..... Secondaries opened at about 27% throttle... My TPS reads 0.60 at rest, shouldnt that be 0.54?

Paul Workman · 04-04-2020

Quote:

Originally Posted by 32valvZ

Hooked mine up to the car today just to check it out. Pretty decent amount of diagnostic capability. Went for a drive to see how things worked. Figured out the tach is off by about 150 rpm (tach reads high) Coolant temp reads surprisingly accurate on the gauge. Oil temp looks to be reading a hair low on the gauge. Fans come on at 208*..... Secondaries opened at about 27% throttle... My TPS reads 0.60 at rest, shouldnt that be 0.54?

Good to have it all @ your finger tips. Were it not for the scanner, I would have perhaps had 2nd thoughts about buying the Z. A big pat of my piece of mind was having a scanner. And, it has paid for itself several times over!

03-29-2020	#1
Young1 Join Date: Sep 2016 Location: Ocala, FL Posts: 894	Snap On Scanner MT 2500 - Did I score well? ED7E7E86-8492-4202-98B8-4162D3D94F51.jpeg I received this scanner with my project Z. The General Motors reference manual is ninth edition November 1998. It has four GM/Chrysler/Ford/Jeep cartridges and plenty of connectors. It has a connector labeled GM-1. Can I assume this scans OBD1? I will be on a steep learning curve here. How did I do? __________________ Steve Young 1991 ZR-1 Quasar Blue Metallic/Black #729 Second Owner 1991 ZR-1 Dark Red Metallic/Black #2040 SOLD 1990 ZR-1 Dark Red Metallic/Saddle #1670 SOLD Double your happiness.....complain half as much.

03-30-2020	#2
Corvette95 Join Date: Jan 2006 Location: Decatur, AL Posts: 1,119	Re: Snap On Scanner MT 2500 - Did I score well? Personally, not a fan, but it may work for you. I use a Tech1A and Tech2 . Depends on the price you paid. __________________ Corvette95 Registry and Forum (*************) 1989 C4 Conv Wht/Gry Auto Hardtop Top Flight SOLD 1995 C4 Coupe Purple/Blk 6 Speed 1989 C4 Conv Wht/Red Auto SOLD 1996 C4 Conv Black/Tan Auto SOLD 1994 C4 Coupe Wht/Blk SOLD 1995 C4 ZR-1 White/Gry #278 Dual Dunn Head SOLD 1986 C4 Coupe Black/Red 4+3 SOLD 1990 C4 ZR-1 Red/Red #0454

03-30-2020	#3
Young1 Join Date: Sep 2016 Location: Ocala, FL Posts: 894	Re: Snap On Scanner MT 2500 - Did I score well? It was included with the Z I bought so no real cash outlay. __________________ Steve Young 1991 ZR-1 Quasar Blue Metallic/Black #729 Second Owner 1991 ZR-1 Dark Red Metallic/Black #2040 SOLD 1990 ZR-1 Dark Red Metallic/Saddle #1670 SOLD Double your happiness.....complain half as much.

03-30-2020	#5
tpr60 Join Date: Feb 2011 Location: Salinas, Ca Posts: 160	Re: Snap On Scanner MT 2500 - Did I score well? I have had one for years, works good. Little hard to navigate, need to use the reference manual a lot. If you can find a black plastic later cartage it will have the latest years in it.

04-03-2020	#6
Paul Workman Join Date: Nov 2007 Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri Posts: 6,493	Re: Snap On Scanner MT 2500 - Did I score well? I snagged one off of ebay, but it didn't have the modules or a manual. But, if someone can point me to which (and where maybe??) modules I need, it sure would be appreciated! I have an old AutoXray unit that works quite well - another ebay find some 18 years ago when I bought my first C4. But, I worry about not having a backup. OR, I might pass it forward to someone if I could get the Snap On working. Suggestions?? __________________ Good carz, good food, good friendz = the best of timez! 90 #1202 "FBI" top end ported & relieved Cam timing by "Pete the Greek" Sans secondaries Chip & dyno tuning by Haibeck Automotive SW headers, X-pipe, MF muffs Former Secretary, ZR-1 Net Registry

04-04-2020	#7
Young1 Join Date: Sep 2016 Location: Ocala, FL Posts: 894	Re: Snap On Scanner MT 2500 - Did I score well? Move to Ocala Paul. We can work on it together. Housing is cheap. No state tax. Taxes are low. Cost of living is low. And the temps are not! __________________ Steve Young 1991 ZR-1 Quasar Blue Metallic/Black #729 Second Owner 1991 ZR-1 Dark Red Metallic/Black #2040 SOLD 1990 ZR-1 Dark Red Metallic/Saddle #1670 SOLD Double your happiness.....complain half as much.

04-04-2020	#9
32valvZ Join Date: Nov 2007 Location: Sunshine State Posts: 1,071	Re: Snap On Scanner MT 2500 - Did I score well? Hooked mine up to the car today just to check it out. Pretty decent amount of diagnostic capability. Went for a drive to see how things worked. Figured out the tach is off by about 150 rpm (tach reads high) Coolant temp reads surprisingly accurate on the gauge. Oil temp looks to be reading a hair low on the gauge. Fans come on at 208*..... Secondaries opened at about 27% throttle... My TPS reads 0.60 at rest, shouldnt that be 0.54? __________________ [B]1990 #2815[/B] [COLOR="Red"][B]Red/Red[/B][/COLOR] Ported Plenum & IH (by Pete) Haibeck Chip Rebuilt FPR (by Phil) FIC Injectors Watson LT Headers 3" Stainless Works exhaust Lingenfelter Open Air Lid Bill B Built Transmission Shifter & C Beam Plates [FONT=Impact][COLOR=red]1992 [COLOR=black]#[/COLOR] 091[/COLOR][/FONT] [FONT=Impact][COLOR=#ff0000]Red/[COLOR=silver]Gray[/COLOR][/COLOR][/FONT] [B]SOLD[/B]