![]() |
#1 |
![]() Join Date: Sep 2016
Location: Ocala, FL
Posts: 890
|
![]()
ED7E7E86-8492-4202-98B8-4162D3D94F51.jpeg
I received this scanner with my project Z. The General Motors reference manual is ninth edition November 1998. It has four GM/Chrysler/Ford/Jeep cartridges and plenty of connectors. It has a connector labeled GM-1. Can I assume this scans OBD1? I will be on a steep learning curve here. How did I do?
__________________
Steve Young 1991 ZR-1 Quasar Blue Metallic/Black #729 Second Owner 1991 ZR-1 Dark Red Metallic/Black #2040 SOLD 1990 ZR-1 Dark Red Metallic/Saddle #1670 SOLD Double your happiness.....complain half as much. |
![]() |
![]() |
![]() |
#2 |
![]() Join Date: Jan 2006
Location: Decatur, AL
Posts: 1,112
|
![]()
Personally, not a fan, but it may work for you. I use a Tech1A and Tech2 . Depends on the price you paid.
__________________
Corvette95 Registry and Forum (*************) 1989 C4 Conv Wht/Gry Auto Hardtop Top Flight SOLD 1995 C4 Coupe Purple/Blk 6 Speed 1989 C4 Conv Wht/Red Auto SOLD 1996 C4 Conv Black/Tan Auto SOLD 1994 C4 Coupe Wht/Blk SOLD 1995 C4 ZR-1 White/Gry #278 Dual Dunn Head SOLD 1986 C4 Coupe Black/Red 4+3 SOLD 1990 C4 ZR-1 Red/Red #0454 |
![]() |
![]() |
![]() |
#3 |
![]() Join Date: Sep 2016
Location: Ocala, FL
Posts: 890
|
![]()
It was included with the Z I bought so no real cash outlay.
__________________
Steve Young 1991 ZR-1 Quasar Blue Metallic/Black #729 Second Owner 1991 ZR-1 Dark Red Metallic/Black #2040 SOLD 1990 ZR-1 Dark Red Metallic/Saddle #1670 SOLD Double your happiness.....complain half as much. |
![]() |
![]() |
![]() |
#4 |
![]() Join Date: Nov 2007
Location: Sunshine State
Posts: 1,071
|
![]()
Exact same way I got mine... Its a complete kit as well. Just havenet needed to use it yet, (thank God)....
__________________
[B]1990 #2815[/B] [COLOR="Red"][B]Red/Red[/B][/COLOR] Ported Plenum & IH (by Pete) Haibeck Chip Rebuilt FPR (by Phil) FIC Injectors Watson LT Headers 3" Stainless Works exhaust Lingenfelter Open Air Lid Bill B Built Transmission Shifter & C Beam Plates [FONT=Impact][COLOR=red]1992 [COLOR=black]#[/COLOR] 091[/COLOR][/FONT] [FONT=Impact][COLOR=#ff0000]Red/[COLOR=silver]Gray[/COLOR][/COLOR][/FONT] [B]SOLD[/B] |
![]() |
![]() |
![]() |
#5 |
Join Date: Feb 2011
Location: Salinas, Ca
Posts: 160
|
![]()
I have had one for years, works good. Little hard to navigate, need to use the reference manual a lot. If you can find a black plastic later cartage it will have the latest years in it.
|
![]() |
![]() |
![]() |
#6 |
![]() ![]() Join Date: Nov 2007
Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri
Posts: 6,493
|
![]()
I snagged one off of ebay, but it didn't have the modules or a manual. But, if someone can point me to which (and where maybe??) modules I need, it sure would be appreciated!
I have an old AutoXray unit that works quite well - another ebay find some 18 years ago when I bought my first C4. But, I worry about not having a backup. OR, I might pass it forward to someone if I could get the Snap On working. Suggestions??
__________________
Good carz, good food, good friendz = the best of timez! 90 #1202 "FBI" top end ported & relieved Cam timing by "Pete the Greek" Sans secondaries Chip & dyno tuning by Haibeck Automotive SW headers, X-pipe, MF muffs Former Secretary, ZR-1 Net Registry |
![]() |
![]() |
![]() |
#7 |
![]() Join Date: Sep 2016
Location: Ocala, FL
Posts: 890
|
![]()
Move to Ocala Paul. We can work on it together. Housing is cheap. No state tax. Taxes are low. Cost of living is low. And the temps are not!
__________________
Steve Young 1991 ZR-1 Quasar Blue Metallic/Black #729 Second Owner 1991 ZR-1 Dark Red Metallic/Black #2040 SOLD 1990 ZR-1 Dark Red Metallic/Saddle #1670 SOLD Double your happiness.....complain half as much. |
![]() |
![]() |
![]() |
#8 | |
![]() Join Date: Jan 2010
Location: Mystic CT
Posts: 2,623
|
![]() Quote:
https://garlits.com/ |
|
![]() |
![]() |
![]() |
#9 |
![]() Join Date: Nov 2007
Location: Sunshine State
Posts: 1,071
|
![]()
Hooked mine up to the car today just to check it out. Pretty decent amount of diagnostic capability. Went for a drive to see how things worked. Figured out the tach is off by about 150 rpm (tach reads high) Coolant temp reads surprisingly accurate on the gauge. Oil temp looks to be reading a hair low on the gauge. Fans come on at 208*..... Secondaries opened at about 27% throttle... My TPS reads 0.60 at rest, shouldnt that be 0.54?
__________________
[B]1990 #2815[/B] [COLOR="Red"][B]Red/Red[/B][/COLOR] Ported Plenum & IH (by Pete) Haibeck Chip Rebuilt FPR (by Phil) FIC Injectors Watson LT Headers 3" Stainless Works exhaust Lingenfelter Open Air Lid Bill B Built Transmission Shifter & C Beam Plates [FONT=Impact][COLOR=red]1992 [COLOR=black]#[/COLOR] 091[/COLOR][/FONT] [FONT=Impact][COLOR=#ff0000]Red/[COLOR=silver]Gray[/COLOR][/COLOR][/FONT] [B]SOLD[/B] |
![]() |
![]() |
![]() |
#10 | |
![]() ![]() Join Date: Nov 2007
Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri
Posts: 6,493
|
![]() Quote:
__________________
Good carz, good food, good friendz = the best of timez! 90 #1202 "FBI" top end ported & relieved Cam timing by "Pete the Greek" Sans secondaries Chip & dyno tuning by Haibeck Automotive SW headers, X-pipe, MF muffs Former Secretary, ZR-1 Net Registry |
|
![]() |
![]() |
![]() |
|
|