ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 Technical Postings

Reply
 
Thread Tools Display Modes
Old 03-15-2020   #11
PhillipsLT5
 
PhillipsLT5's Avatar
 
Join Date: Aug 2005
Location: Scottsdale, AZ
Posts: 2,450
Default Re: catalytic converters carb

Quote:
Originally Posted by Z51JEFF View Post
I honestly don’t know why a competent shop would turn away a ZR-1,business must be good.
They have Plenty of C6 & C7 business
PhillipsLT5 is offline   Reply With Quote
Old 03-15-2020   #12
A26B
 
A26B's Avatar
 
Join Date: Dec 2003
Location: Arcadia,OK
Posts: 3,376
Default Re: catalytic converters carb

Quote:
Originally Posted by Corvettes White View Post
My understanding is that it is illegal to install used cats in California. And new cats are no longer available. So, keeping it legal, no simple issue. One person did go the referee path - from what have read in threads before, and with a letter from the dealer saying the parts were no longer available installed a non CARB approved system. I believe headers with aftermarket cats.
Just from having been here forever, if the cats look original to the car, the smog techs will pass the car. It they look replaced, for a 30 year old car, they may look to see if they are NOS or if they have a CARB number. Last I heard there are no CARB approved systems for the our cars with one piece exhaust manifolds. Without a CARB number, no matter how clean the exhaust is, no pass.
As for the cats the gentlemen has near Reno, if I was in need of a set, I would "make him an offer he couldn't refuse."
George
The OP called me & I located a set of very good OEM manifolds/cats which were correct for his car. I even called Corvette Mike's parts guy (they are a customer of Jerrys Gaskets). The parts manager was all in favor of it but the tech doing the work wouldn't do it. I didn't understand at the time, especially not being familiar with CA code. They may not have a CARB number but they would certainly be original for the car.

I suggested he find another shop to replace the manifold/cats. I never heard from him again.
__________________
Jerry Downey
JERRYS LT5 GASKETS & PARTS
http://www.jerrysgaskets.com
1994 ZR-1, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc.
2016 Black-Red, 3LT-Z51 Auto 8-speed.
A26B is offline   Reply With Quote
Old 03-15-2020   #13
-=Jeff=-
 
-=Jeff=-'s Avatar
 
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,142
Default Re: catalytic converters carb

Quote:
Originally Posted by Z51JEFF View Post
I honestly don’t know why a competent shop would turn away a ZR-1
Cause these cars are 25-30 years old.. Hate to say it but many techs were not even born when the ZR-1 FINISHED Production.. This car has a SMALL, wait TINY, percentage so I get exactly why many shops will not touch them
__________________
1990 Corvette ZR-1 #1051
Watson Headers (2" Primary) - Borla Catback
Late Model IH - Plenum
Coilovers - 4.10s
Custom Interior
NCM Lifetime Member #978
-=Jeff=- is online now   Reply With Quote
Old 03-15-2020   #14
Corvettes White
 
Join Date: Dec 2003
Posts: 470
Default Re: catalytic converters carb

A lot of shops will not install uncertified equipment on a car in California. The state checks by taking in their old bait cars and all offical smog checks here are computerized. But on the other hand no safety checks either.
Corvettes White is offline   Reply With Quote
Old 03-15-2020   #15
-=Jeff=-
 
-=Jeff=-'s Avatar
 
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,142
Default Re: catalytic converters carb

Move out of California then you don’t have to del with smog nazis..

Easy said than done, I know
__________________
1990 Corvette ZR-1 #1051
Watson Headers (2" Primary) - Borla Catback
Late Model IH - Plenum
Coilovers - 4.10s
Custom Interior
NCM Lifetime Member #978
-=Jeff=- is online now   Reply With Quote
Old 03-15-2020   #16
tf95ZR1
 
tf95ZR1's Avatar
 
Join Date: Aug 2005
Location: Northridge, CA
Posts: 1,447
Default Re: catalytic converters carb

Quote:
Originally Posted by A26B View Post
The OP called me & I located a set of very good OEM manifolds/cats which were correct for his car. I even called Corvette Mike's parts guy (they are a customer of Jerrys Gaskets). The parts manager was all in favor of it but the tech doing the work wouldn't do it. I didn't understand at the time, especially not being familiar with CA code. They may not have a CARB number but they would certainly be original for the car.

I suggested he find another shop to replace the manifold/cats. I never heard from him again.
We still haven't heard why he needs new cats.
__________________
1995 ZR-1 #106 Blk/ Blk
Owned by me since 2000.
91K miles, but not on motor :-)
Mods the way I want it,
Not afraid to drive it!
tf95ZR1 is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:01 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020