|
09-23-2019
|
#1 |
 Join Date: Apr 2004
Location: ATL. GA.
Posts: 2,168
|
Time to replace Clutch master/slave
What are my best options? I have a spare slave that can be rebuilt. Both on the car are original. Thanks
__________________
Steve 1990 Steel Blue/Black #2355 1990 Red/Red #1473 1991 Quasar /Black #118 Sold 1991 Turquoise/Black #766 Parted Out 1993 Yellow/White #179 Sold 1990 Black/Gray #1361 Headers/4:10s Sold |
|
|
|
09-23-2019
|
#2 |
 Join Date: Dec 2014
Location: Long Island, NY
Posts: 295
|
Re: Time to replace Clutch master/slave
Contact ZF-Doc, Bill bought remainder stock oem.
There's a known batch of these assembled incorrectly (backwards seal), Bill goes through them make sure they are right.
__________________
1990 ZR-1 #1587 1990 ZR-1 #1727 |
|
|
|
|
09-23-2019
|
#3 |
|
Join Date: Apr 2004
Location: ATL. GA.
Posts: 2,168
|
Re: Time to replace Clutch master/slave
Thanks George, will do.
Second ?, I've been reading about what fluid to use see dot 4 brake fluid and the clutch fluid both recommended.... School me please. Thanks.
__________________
Steve 1990 Steel Blue/Black #2355 1990 Red/Red #1473 1991 Quasar /Black #118 Sold 1991 Turquoise/Black #766 Parted Out 1993 Yellow/White #179 Sold 1990 Black/Gray #1361 Headers/4:10s Sold Last edited by We Gone; 09-23-2019 at 03:42 PM. |
|
|
|
|
09-23-2019
|
#4 |
 
Join Date: Nov 2007
Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri
Posts: 6,493
|
Re: Time to replace Clutch master/slave
PM me with your email addy and I'll send you the article on the MASTER/SLAVE replacement including parts tools and procedures.
Cheers! Paul.
__________________
Good carz, good food, good friendz = the best of timez! 90 #1202 "FBI" top end ported & relieved Cam timing by "Pete the Greek" Sans secondaries Chip & dyno tuning by Haibeck Automotive SW headers, X-pipe, MF muffs Former Secretary, ZR-1 Net Registry |
|
|
|
|
09-24-2019
|
#5 |
|
Join Date: Apr 2004
Location: ATL. GA.
Posts: 2,168
|
Re: Time to replace Clutch master/slave
Got it Paul, thanks again guys for your assistance.
I'm not down yet! but been getting a very black fluid within days of changing the fluid so I know its time to do some preventive maintenance. I have a spare set of master/slave used I picked many years ago so will see about sending them out for rebuild.
__________________
Steve 1990 Steel Blue/Black #2355 1990 Red/Red #1473 1991 Quasar /Black #118 Sold 1991 Turquoise/Black #766 Parted Out 1993 Yellow/White #179 Sold 1990 Black/Gray #1361 Headers/4:10s Sold |
|
|
|
|
10-20-2019
|
#6 |
|
Join Date: Apr 2004
Location: ATL. GA.
Posts: 2,168
|
Re: Time to replace Clutch master/slave
Thanks Paul, your guide worked great. Everything back together and works great.
Thanks Bill B. for rebuilding my master, great job. Also replaced the neutral safety switch (went out a few years back could not find one), Jerry's had an NOS man replacing it was a bear!!
__________________
Steve 1990 Steel Blue/Black #2355 1990 Red/Red #1473 1991 Quasar /Black #118 Sold 1991 Turquoise/Black #766 Parted Out 1993 Yellow/White #179 Sold 1990 Black/Gray #1361 Headers/4:10s Sold |
|
|
|
|
10-20-2019
|
#7 | |
|
Join Date: Nov 2007
Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri
Posts: 6,493
|
Re: Time to replace Clutch master/slave
Quote:
__________________
Good carz, good food, good friendz = the best of timez! 90 #1202 "FBI" top end ported & relieved Cam timing by "Pete the Greek" Sans secondaries Chip & dyno tuning by Haibeck Automotive SW headers, X-pipe, MF muffs Former Secretary, ZR-1 Net Registry |
|
|
|
|
|
10-20-2019
|
#8 | |
|
Join Date: Apr 2004
Location: ATL. GA.
Posts: 2,168
|
Re: Time to replace Clutch master/slave
Quote:
__________________
Steve 1990 Steel Blue/Black #2355 1990 Red/Red #1473 1991 Quasar /Black #118 Sold 1991 Turquoise/Black #766 Parted Out 1993 Yellow/White #179 Sold 1990 Black/Gray #1361 Headers/4:10s Sold |
|
|
|
|
 |
|
|
Linear Mode
