![]() |
#1 |
![]() Join Date: Jan 2018
Location: Sweden
Posts: 73
|
![]()
Hello all
Does anyone know where to find replacement bolts for the rear upper shock bracket? I broke more than one during disassembly and my web searching has failed me... Or would it be possible to use a standard M8 bolt with the same strength (10.9) but without the threaded tip? I guess that this could make reassembly slightly harder? Regards ChrisIMG_20190408_221150.jpg Sent from my EVR-L29 using ZR-1 Net Registry mobile app |
![]() |
![]() |
![]() |
#2 | |
![]() Join Date: Nov 2007
Location: Sunshine State
Posts: 1,071
|
![]() Quote:
![]()
__________________
[B]1990 #2815[/B] [COLOR="Red"][B]Red/Red[/B][/COLOR] Ported Plenum & IH (by Pete) Haibeck Chip Rebuilt FPR (by Phil) FIC Injectors Watson LT Headers 3" Stainless Works exhaust Lingenfelter Open Air Lid Bill B Built Transmission Shifter & C Beam Plates [FONT=Impact][COLOR=red]1992 [COLOR=black]#[/COLOR] 091[/COLOR][/FONT] [FONT=Impact][COLOR=#ff0000]Red/[COLOR=silver]Gray[/COLOR][/COLOR][/FONT] [B]SOLD[/B] |
|
![]() |
![]() |
![]() |
#3 |
![]() Join Date: Jun 2006
Location: Sparks, NV
Posts: 2,852
|
![]()
Get a hold of Mark at www.MirrockCorvette.com. I’m sure it’s no different than a standard C4 shock mounting bolt.
H ![]()
__________________
90'ZR-1 #1461 Red/Black Ported Intake, Degreed Cams, OBX Headers & Exhaust, Fidanza FW, Secondary Delete, Custom tune, C6 GS Wheels. Sold 08 C6 Z51 Crystal Red Metallic Sold Vararam Intake, Tune, Sold 05 C6 Z51 Red/Black Sold 90'ZR-1 #1723 Black/Gray Sold but not forgotten 91' Z51 L98 White Vert. My First, you always remember your first. Sold. |
![]() |
![]() |
![]() |
#4 |
![]() Join Date: Oct 2004
Posts: 1,889
|
![]()
Are Wuerth/Wurth fasteners available to you in Sweden?
M8-1.25X30 for '90 & '91, spec changed to 40 for '92 - '95. 10.9 is a hard to find I'd think in correct finish and CA tip. I'd think 9.8 would do. The longer spec 40mm is still available from GM and replaces the 30mm here in the US> Do you have maybe an order from a US vendor that you could add them to? The 40mm spec might not currently have the CA point. You could ask for also a 'dog point' which actually is more common today. The CA tip just eased factory assembly. Chase your threads and I'd think you're all set. |
![]() |
![]() |
![]() |
#5 |
![]() Join Date: Jan 2018
Location: Sweden
Posts: 73
|
![]()
Thanks for the reply everyone! I have a wurth store in the local area and will check with them first.
I appreciate that you detailed the specs WVZR-1. My Z is a 1990. Thanks Ccmano for the link suggestion. Sent from my EVR-L29 using ZR-1 Net Registry mobile app |
![]() |
![]() |
![]() |
#6 |
![]() Join Date: Oct 2004
Posts: 1,889
|
![]()
If you can't be helped at Wurth I'd think nearly every auto manufacturer would use a 10.9 spec, flange head M8-1.25 likely considered 'frame bolt'. You might do well at most any dealer. You would likely sacrifice the CA point but like I mentioned just 'chase' the threads.
|
![]() |
![]() |
![]() |
#7 |
![]() Join Date: Mar 2007
Location: Sweden
Posts: 28
|
![]()
Oem bolts you can probably get at www.eatab.com in Hallaryd.
Last edited by Rodder; 04-09-2019 at 05:00 PM. Reason: fixed link |
![]() |
![]() |
![]() |
#8 |
![]() Join Date: Jan 2018
Location: Sweden
Posts: 73
|
![]()
Hello all
I just wanted to close this post after getting a hold of GM 11515758 bolts today from an opel dealer. It took for ever to get the delivered from Germany but now I can put my Z back together. I would like to thank everybody who posted responses here. I am very glad that the registry has all you helpful people. Sent from my EVR-L29 using ZR-1 Net Registry mobile app |
![]() |
![]() |
![]() |
|
|