FS: Rebuilt original clutch master and slave cylinders with all new OEM components - ZR-1 Net Registry Forums

zmechanism · 01-14-2019

Rebuilt by Jim Jandik and recently (around a month or so) disassembled/ inspected/reassembled by Bill Boudreau to ensure the parts are in 100% working order because one of the parts was sitting on the shelf for a while after being rebuilt by Jim Jandik. Bill pre-filled the clutch slave cylinder with fluid to make installation much easier. $175 each plus shipping. The clutch master cylinder I believe fits all 90-95 ZR1’s and the clutch slave cylinder fits 91-95 ZR1’s. Jim recently retired and Bill took over rebuilding the clutch hydraulic system parts. See the pictures below.

IMG_20190114_193744678.jpg

IMG_20190114_193818916.jpg

IMG_20190114_194253531.jpg

IMG_20190114_194320287.jpg

ABBEZR1 · 01-16-2019

I didn't know Jim retired....He rebuilt my slave and because it was a 90 model he put in a flat bleeder so I can bleed my system like all the 91 and up years...

He's probably fishing because every time I has talked with him he was either going racing or fishing...

Steve

RussMcB · 01-16-2019

Nice looking parts Tempting (but mine aren't too old).

Good provenance, too. Peace of mind when you know you're installing high quality parts.

GLWS.

01-14-2019	#1
zmechanism Join Date: Sep 2016 Location: Maryland Posts: 3	FS: Rebuilt original clutch master and slave cylinders with all new OEM components Rebuilt by Jim Jandik and recently (around a month or so) disassembled/ inspected/reassembled by Bill Boudreau to ensure the parts are in 100% working order because one of the parts was sitting on the shelf for a while after being rebuilt by Jim Jandik. Bill pre-filled the clutch slave cylinder with fluid to make installation much easier. $175 each plus shipping. The clutch master cylinder I believe fits all 90-95 ZR1’s and the clutch slave cylinder fits 91-95 ZR1’s. Jim recently retired and Bill took over rebuilding the clutch hydraulic system parts. See the pictures below. IMG_20190114_193744678.jpg IMG_20190114_193818916.jpg IMG_20190114_194253531.jpg IMG_20190114_194320287.jpg

01-16-2019	#2
ABBEZR1 Join Date: Apr 2017 Location: Jackson,Mi, Area Posts: 52	Re: FS: Rebuilt original clutch master and slave cylinders with all new OEM component I didn't know Jim retired....He rebuilt my slave and because it was a 90 model he put in a flat bleeder so I can bleed my system like all the 91 and up years... He's probably fishing because every time I has talked with him he was either going racing or fishing... Steve __________________ _______________________ 1990 Bright Red/Black #946 B and B X-Pipe Stainless Works Long Tube Headers Cat delete 49th Street Rockers Haibeck Chip and Tune

01-16-2019	#3
RussMcB Join Date: Jan 2015 Location: Marietta, GA USA Posts: 1,160	Re: FS: Rebuilt original clutch master and slave cylinders with all new OEM component Nice looking parts Tempting (but mine aren't too old). Good provenance, too. Peace of mind when you know you're installing high quality parts. GLWS. Last edited by RussMcB; 01-16-2019 at 05:37 PM.