Engine Pull/Install with headers - Page 3 - ZR-1 Net Registry Forums

tnova · 04-11-2018

Hans,
Did the cams for the first time last year using the updated instructions from Marc posted on his business site. Takes time but once one cam done, others follow quickly.
Tony - Tnova

Ccmano · 04-11-2018

What would be helpful is if there was a video of this process. Haven’t found one yet.
H

A26B · 04-11-2018

If you do decide to time the cams, by any method, you must replace the cam sprocket bolts. Quite a few engines have had major damage due to broken, OEM bolts which are torque to yield, one use only.

Ccmano · 04-11-2018

Quote:

Originally Posted by A26B

If you do decide to time the cams, by any method, you must replace the cam sprocket bolts. Quite a few engines have had major damage due to broken, OEM bolts which are torque to yield, one use only.

Thanks Jerry, yes already on my list to buy from you. I’m putting my list together for gaskets, seals and other things I will be needing. I’ll be placing the order once I know all that I need.
H

tnova · 04-13-2018

Yes, what Jerry said. I used the old bolts while timing the cams. Once the timing was set, installed the new bolts.

04-11-2018	#21
tnova Join Date: Oct 2013 Location: Spokane Valley, WA Posts: 115	Re: Engine Pull/Install with headers Hans, Did the cams for the first time last year using the updated instructions from Marc posted on his business site. Takes time but once one cam done, others follow quickly. Tony - Tnova

04-11-2018	#22
Ccmano Join Date: Jun 2006 Location: Sparks, NV Posts: 2,852	Re: Engine Pull/Install with headers What would be helpful is if there was a video of this process. Haven’t found one yet. H __________________ 90'ZR-1 #1461 Red/Black Ported Intake, Degreed Cams, OBX Headers & Exhaust, Fidanza FW, Secondary Delete, Custom tune, C6 GS Wheels. Sold 08 C6 Z51 Crystal Red Metallic Sold Vararam Intake, Tune, Sold 05 C6 Z51 Red/Black Sold 90'ZR-1 #1723 Black/Gray Sold but not forgotten 91' Z51 L98 White Vert. My First, you always remember your first. Sold.

04-11-2018	#23
A26B Join Date: Dec 2003 Location: Arcadia,OK Posts: 3,393	Re: Engine Pull/Install with headers If you do decide to time the cams, by any method, you must replace the cam sprocket bolts. Quite a few engines have had major damage due to broken, OEM bolts which are torque to yield, one use only. __________________ Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 *ZR-1*, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed.

04-13-2018	#25
tnova Join Date: Oct 2013 Location: Spokane Valley, WA Posts: 115	Re: Engine Pull/Install with headers Yes, what Jerry said. I used the old bolts while timing the cams. Once the timing was set, installed the new bolts.