|
10-05-2017
|
#1 |
 Join Date: Jan 2010
Location: Freedom Pa
Posts: 275
|
Input on 10 Car Storage Building?????
Hi & Thanks. I am starting to think about building a 10 car storage building. This is not to work on cars in, just storage. I have lots of space, 10 Acres. Since I live in the Northeast, I think I am going to do the heated floor, which, I think it will also cool, but I might be wrong. I plan to build it so I can have 10 lifts installed so I could add lifts as I need them. I will have a man door with a mechanical room for the heater/boiler & a small compressor. I will probably run overhead fans 24/7 & maybe a dehumidifier. Any input or suggestions, sizes etc, would be appreciated. Thanks, Tim
|
|
|
|
10-07-2017
|
#2 |
 
Join Date: Apr 2013
Location: Toronto
Posts: 716
|
Re: Input on 10 Car Storage Building?????
If you can put in floor hydronic heating in the concrete base of the garage . Use solar or ground source heatpump to heat the floor . Install an air exchanger for humidity control . Try to use as much solar and battery storage to run fans and pumps and LED lighting .
If i could build a place to store vehicles that is what I would do . Try to stay off the grid ...  Sent from my LG-H831 using ZR-1 Net Registry mobile app |
|
|
|
|
10-07-2017
|
#3 |
Join Date: Feb 2012
Location: Ledyard,CT
Posts: 8,227
|
Re: Input on 10 Car Storage Building?????
Convert to Amish?
|
|
|
|
|
10-07-2017
|
#4 | |
|
Join Date: Jan 2010
Location: Freedom Pa
Posts: 275
|
Re: Input on 10 Car Storage Building?????
Quote:
|
|
|
|
|
|
10-12-2017
|
#5 | |
   
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
|
Re: Input on 10 Car Storage Building?????
Quote:
Tim if I may suggest a drive through approach. I have a 6 car garage but On my 4 car tandem side of the structure I have a front and a rear garage door so you can drive through it to the back yard. This makes jockeying around cars a lot easier once everything starts filling up. IF you were working on cars in there I would suggest a small office and a toilet with a wash basin and use the space above that area for overhead storage. Make sure you make enough head room for the lifts you want. just my .02
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director  91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
|
|
|
|
|
10-14-2017
|
#6 |
|
Join Date: Jan 2010
Location: Freedom Pa
Posts: 275
|
Re: Input on 10 Car Storage Building?????
Thanks GC. This is going to be a pure storage garage. I have 3600 Sq Ft building to do work on. I did contemplate about the drive thru type set up & I believe it is a winner. I think what I'm going to do initially is frame in the rough in's on the backside, this will give me versitility & the better insulation value of sheeting.....add as I need. Please, Keep it coming!
|
|
|
|
|
10-14-2017
|
#7 |
Join Date: Sep 2008
Location: Mullica Hill, New Jersey
Posts: 2,592
|
Re: Input on 10 Car Storage Building?????
Lifts always seem like a great idea for storage, and they do efficiently utilize space.
However, the cars ON my lifts come out far less than the cars UNDER my lifts. I would consider the drive through approach. Having doors on both sides of each 2 car bay makes it a lot easier to get the chosen car out, and eliminates the reluctance to move and lower. A great problem to have but still a problem.  Marty |
|
|
|
|
01-08-2018
|
#8 |
|
Join Date: Sep 2011
Location: TN
Posts: 581
|
Re: Input on 10 Car Storage Building?????
I would suggest having me and my partner pour your concrete
 also like Crylon said " the drive thru approach I think would be best . Since it wold probably be a metal building I would suggest using the best metal screws available - there are various types available -( this is the weak link when using tin) . Good Luck - post some pictures |
|
|
|
 |
|
|
Linear Mode
