Leaking something... - ZR-1 Net Registry Forums

rush91 · 07-05-2017

I noticed this while checking the oil, a spot of oil by the injector housing pipe. I wiped it off and it had discolored the engine finish....again after a few days of driving I checked and it's still there. Is a plenum pull the only way to truly diagnose it? I'm not seeing any cracks in the pipe and can't figure out where it is coming from.....1499297379069.jpg 1499297388534.jpg

Sent from my XT1585 using ZR-1 Net Registry mobile app

secondchance · 07-05-2017

Have you checked underside of aluminum PCV pipe? Oil could be seeping between the rubber PCV elbow to aluminum pipe and running down the pipe. Or, oil could be seeping between the injector housing and rubber elbow. Just a thought...

rush91 · 07-06-2017

I did look and the pipe wasn't cracked or anything. And the rubber elbow piece looks new, and seems to be ok..... I thought maybe oil from under the plenum somehow is splashing up there. Lol I need to send my car back to Marc H or someone who works on these... I had a great mechanic but he won't work on it anymore for some reason. And the guy he suggested did good work, but the bill OMG!!!!! For coolant flush and tranny fluid change, it was over $450 bucks!! And I supplied all the fluids lol..... Thanks for he suggestions, I've parked her for the week and will check both the elbow and pipe better tonight.

Sent from my XT1585 using ZR-1 Net Registry mobile app

Ccmano · 07-06-2017

Probably coming from inside the plenum. Oil accumulates there naturally from the PVC system. It's probably just seeping out from the other end of where that pipe is connected to the plenum. A lot of people put catch cans into the PVC system to prevent oil from being sucked into the plenum. I wouldn't get to excited about it. You may actually have a slight vacuum leak at that connection if oil is seeping out like that.
H

07-05-2017	#1
rush91 Join Date: Feb 2016 Location: Carterville Illinois Posts: 849	Leaking something... I noticed this while checking the oil, a spot of oil by the injector housing pipe. I wiped it off and it had discolored the engine finish....again after a few days of driving I checked and it's still there. Is a plenum pull the only way to truly diagnose it? I'm not seeing any cracks in the pipe and can't figure out where it is coming from.....1499297379069.jpg 1499297388534.jpg Sent from my XT1585 using ZR-1 Net Registry mobile app

07-05-2017	#2
secondchance Join Date: Aug 2006 Location: McLean, VA Posts: 3,721	Re: Leaking something... Have you checked underside of aluminum PCV pipe? Oil could be seeping between the rubber PCV elbow to aluminum pipe and running down the pipe. Or, oil could be seeping between the injector housing and rubber elbow. Just a thought...

07-06-2017	#3
rush91 Join Date: Feb 2016 Location: Carterville Illinois Posts: 849	Re: Leaking something... I did look and the pipe wasn't cracked or anything. And the rubber elbow piece looks new, and seems to be ok..... I thought maybe oil from under the plenum somehow is splashing up there. Lol I need to send my car back to Marc H or someone who works on these... I had a great mechanic but he won't work on it anymore for some reason. And the guy he suggested did good work, but the bill OMG!!!!! For coolant flush and tranny fluid change, it was over $450 bucks!! And I supplied all the fluids lol..... Thanks for he suggestions, I've parked her for the week and will check both the elbow and pipe better tonight. Sent from my XT1585 using ZR-1 Net Registry mobile app

07-06-2017	#4
Ccmano Join Date: Jun 2006 Location: Sparks, NV Posts: 2,852	Re: Leaking something... Probably coming from inside the plenum. Oil accumulates there naturally from the PVC system. It's probably just seeping out from the other end of where that pipe is connected to the plenum. A lot of people put catch cans into the PVC system to prevent oil from being sucked into the plenum. I wouldn't get to excited about it. You may actually have a slight vacuum leak at that connection if oil is seeping out like that. H __________________ 90'ZR-1 #1461 Red/Black Ported Intake, Degreed Cams, OBX Headers & Exhaust, Fidanza FW, Secondary Delete, Custom tune, C6 GS Wheels. Sold 08 C6 Z51 Crystal Red Metallic Sold Vararam Intake, Tune, Sold 05 C6 Z51 Red/Black Sold 90'ZR-1 #1723 Black/Gray Sold but not forgotten 91' Z51 L98 White Vert. My First, you always remember your first. Sold.