|
06-04-2017
|
#1 |
 
Join Date: Sep 2016
Location: Ocala, FL
Posts: 895
|
Camshaft position sensor part# needed please
I have done my searching and cannot seem to find a good part number. Jerry's site has a photo of the sensor but it does not have a pigtail and appears to be too long. I also do not want to install an inferior part that doesn't last. My Z has refused to start on all eight cylinders and has stalled and thrown the 31 code. She is being rebellious.
|
|
|
|
06-04-2017
|
#2 |
 
Join Date: Dec 2003
Location: Arcadia,OK
Posts: 3,393
|
Re: Camshaft position sensor part# needed please
Thanks for checking Jerrys Gaskets, but we do not have any cam position sensors currently listed in the webstore. You may have been looking at the crank position sensor which is similar but no pigtail.
The OEM Cam Position Sensor is PN 10137658.
__________________
Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 ZR-1, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed. |
|
|
|
|
06-04-2017
|
#3 |
|
Join Date: Dec 2003
Location: Arcadia,OK
Posts: 3,393
|
Re: Camshaft position sensor part# needed please
Have you followed the flow chart in the service manual for code 31, to verify it is indeed a failed sensor?
__________________
Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 ZR-1, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed. |
|
|
|
|
06-04-2017
|
#4 |
|
Join Date: Dec 2003
Location: Arcadia,OK
Posts: 3,393
|
Re: Camshaft position sensor part# needed please
Google search turned up a possible source. Suggest you call & verify first.
https://www.volvette.com/4EL48A.html
__________________
Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 ZR-1, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed. |
|
|
|
|
06-04-2017
|
#5 |
|
Join Date: Sep 2016
Location: Ocala, FL
Posts: 895
|
Re: Camshaft position sensor part# needed please
Holy Cow! 349. I found it at Whites also for 296. Napa 238. I figured it was a $40 part! I do not have a service manual. Can I download this flow chart somewhere?
Sent from my iPhone using ZR-1 Net Registry
__________________
Steve Young 1991 ZR-1 Quasar Blue Metallic/Black #729 Second Owner 1991 ZR-1 Dark Red Metallic/Black #2040 SOLD 1990 ZR-1 Dark Red Metallic/Saddle #1670 SOLD Double your happiness.....complain half as much. |
|
|
|
|
06-04-2017
|
#6 |
Join Date: Nov 2016
Location: Norway
Posts: 397
|
Re: Camshaft position sensor part# needed please
Send a PM to WVZR-1. He's got an electronic version, only charges a few $$.
__________________
- '90 ZR-1 |
|
|
|
|
06-04-2017
|
#7 |
|
Join Date: Dec 2003
Location: Arcadia,OK
Posts: 3,393
|
Re: Camshaft position sensor part# needed please
PM your cell # & I will send you a photo of the appropriate pages for Code 31
__________________
Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 ZR-1, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed. |
|
|
|
|
06-06-2017
|
#8 |
Join Date: Dec 2007
Location: Fremont,Ca
Posts: 3,074
|
Re: Camshaft position sensor part# needed please
I replaced mine awhile ago and I think it was a STANDARD brand and close to $200.
|
|
|
|
 |
|
|
Linear Mode
