Clutch master to slave hydraulic line??

[Paul Workman]

I need to replace the hydraulic line between the master and slave cylinders on my 90 ZR-1. I tried several to no avail.

I imagine too that a competent hydraulic repair shop would be able to make one, OR maybe I could (with the right parts and tools of course).

Of course, I'd prefer new, AND braided too would be nice. (I tried Jerry's Gaskets web page, but if he's got 'em, his search engine can't find 'em, apparently...)

Any recommendations???

[KPW]

I bought one for the 91 at Corvette Central, new and braided.

Just looked and here is what they have for 90. Not sure if this is LT5 specific?

http://www.parts123.com/corvettecent...50f&ukey=13194


Sent from my iPhone using ZR-1 Net Registry

[Paul Workman]

Well, that was quick! Thanks!!

[HAWAIIZR-1]

Hey P,

I'm at work now, but I'll send you the part number tonight for the braided one you're looking for. I just bought one. Someone will probably beat me to it.


Sent from my iPhone using ZR-1 Net Registry

[HAWAIIZR-1]

Hey P,

As promised. Part #CH9196. You can it get from a few places:



http://www.cssbinc.com/corvette1991-96clutchhose.aspx



http://m.ebay.com/itm/121100757521?_mwBanner=1





Sent from my iPhone using ZR-1 Net Registry

[Paul Workman]

Originally Posted by HAWAIIZR-1

Hey P,

As promised. Part #CH9196. You can it get from a few places:



http://www.cssbinc.com/corvette1991-96clutchhose.aspx



http://m.ebay.com/itm/121100757521?_mwBanner=1





Sent from my iPhone using ZR-1 Net Registry

Great info! I thank you, as do many others here I'm sure!

[Dynomite]

Originally Posted by HAWAIIZR-1

Hey P,

As promised. Part #CH9196. You can it get from a few places:



http://www.cssbinc.com/corvette1991-96clutchhose.aspx
http://m.ebay.com/itm/121100757521?_mwBanner=1

Sent from my iPhone using ZR-1 Net Registry

I think this is one more case where there were changes between 1990 and 1991. 1991 appears to be a SS Braided hose with swedged end fittings and 1990 appears to be a combination two steel pipes and short length rubber hose in between

If this SS Braided hose works on your 1990 Paul......post up

Just found out the Full Power Key Switch may be another change between 1990 and 1991. Waiting on that verification for the moment as Kevin and I both successfully refurbished our 1990 Full Power Key Switches which refurbishment does not necessarily apply to 1991 and later

I may have to modify/upgrade..........Differences between 90', 91' and 95' ZR-1s and Engines

[Paul Workman]

Well, many thanks for all the leads! I've ear-marked them all for reference.

In the mean time, I might have located one from Summit Racing - which is 1/3 the cost (is $44.xx shipped) of some of these. But, if it doesn't fit, then I won't hesitate to "pull the trigger" for one of these recommendations!

Again, mine is a 1990 - not sure what the difference might be, tho the Dorman slave has the bleeder on the bottom (hallelujah!).

I will "post up" with my findings when parts arrive.

Paul.

[2ljd]

Corvette Brakes makes one for the 89-90...

http://www.cssbinc.com/clutch-hose-1...t10147949.aspx

[HAWAIIZR-1]

Originally Posted by Paul Workman

Great info! I thank you, as do many others here I'm sure!

You're welcome P! When I had my 90 I upgraded both the line and clutch slave cylinder to later model per both the Doc and Jim J for the bleed purpose. I think both have to be done together.

http://www.zfdoc.com/clutch_hydraulic.htm

At that time I had the GM line. If I had another 90 I would upgrade it too.

Craig




Sent from my iPhone using ZR-1 Net Registry