How do you remove the pins from the ECM plugs - ZR-1 Net Registry Forums

bike01 · 08-05-2005

Can anyboody tell me "IN DETAIL" how to remove the female pins in the ECM plugs that connect to the back of the ECM.

I've been having some idle problems and when I 'jiggle' the wires on the back of the ECM the problems go away, at least for a while. I want to check them for corrosion and insure the harness wires have a good connection to the female pin.

I don't want to damage the connectors.

Tyler Townsley · 08-05-2005

Are you talking about the connector pins or the pins on the ecm. The pins on the ecm are fixed but the pins in the cable can be removed with a tool.

Tyler

08-05-2005	#1
bike01 Join Date: Apr 2004 Posts: 14	How do you remove the pins from the ECM plugs Can anyboody tell me "IN DETAIL" how to remove the female pins in the ECM plugs that connect to the back of the ECM. I've been having some idle problems and when I 'jiggle' the wires on the back of the ECM the problems go away, at least for a while. I want to check them for corrosion and insure the harness wires have a good connection to the female pin. I don't want to damage the connectors.

08-05-2005	#2
Tyler Townsley Join Date: May 2005 Location: Nichols, FL Posts: 615	Are you talking about the connector pins or the pins on the ecm. The pins on the ecm are fixed but the pins in the cable can be removed with a tool. Tyler __________________ 55 Polo White (Project) 61 Jewel Blue (Sold to buy above) 66 Nassau Blue 68 Torch Red 88 ZR1 Blue 90 ZR1 White