![]() |
#1 |
![]() Join Date: Apr 2013
Location: Eastern Missouri
Posts: 773
|
![]()
I need to take this piece off and replace it. Tried to glue it on inside, not successful. It has come loose and leaves a gap between it and console edge. I took the screw out that's next to the peg left rear of console, and the one left front of console. Still wouldn't come off. So if someone could tell me what that part is called so I can find/order a new one, and how to take it off I would appreciate it...
![]()
__________________
[LEFT][SIGPIC][/SIGPIC][/LEFT] [CENTER][COLOR=Indigo][SIZE=4][I][B] **Now Sold** 1990 ZR-1 #2093, Black on Black..[/B][/I][/SIZE][/COLOR][/CENTER] |
![]() |
![]() |
![]() |
#2 |
![]() Join Date: Apr 2004
Location: ATL. GA.
Posts: 2,169
|
![]()
yes it comes off, its part of the side of the console. Should have about 3 screws one at the top near the radio one up front in the foot whell and one near the seat belt. They are kind of hard to see as the are just phillips and hide well in the carpet. I just fixed mine. I reinforced it from behind.
Hope this helps I saw a post somewhere on fixing it just can't find it. http://www.corvetteforum.com/forums/...bber-trim.html
__________________
Steve 1990 Steel Blue/Black #2355 1990 Red/Red #1473 1991 Quasar /Black #118 Sold 1991 Turquoise/Black #766 Parted Out 1993 Yellow/White #179 Sold 1990 Black/Gray #1361 Headers/4:10s Sold Last edited by We Gone; 04-19-2016 at 11:46 AM. |
![]() |
![]() |
![]() |
#3 |
![]() Join Date: Oct 2004
Posts: 1,889
|
![]()
If the 8C-13 location was good for one year, a page very close to that section should have similar for most any year.
A '90 8C-17 for left side!! Last edited by WVZR-1; 04-19-2016 at 12:15 PM. |
![]() |
![]() |
![]() |
#4 |
![]() Join Date: Apr 2013
Location: Eastern Missouri
Posts: 773
|
![]()
Thanks Guys!
![]()
__________________
[LEFT][SIGPIC][/SIGPIC][/LEFT] [CENTER][COLOR=Indigo][SIZE=4][I][B] **Now Sold** 1990 ZR-1 #2093, Black on Black..[/B][/I][/SIZE][/COLOR][/CENTER] |
![]() |
![]() |
![]() |
|
|