Quick Car Lift Question - ZR-1 Net Registry Forums

BlackZR1 · 08-15-2015

"Solutions" describe lifting the rear: "A Steel adapter has been designed and proven safe to lift the rear axle directly under the center of the rear spring mount using a floor jack." "The pipe adapter is captured between the rear spring mount bolts"
If I read this correctly, and looking at my car. the adapter will be in contact with the spring itself correct?

Thanks,
Roger

Kevin · 08-15-2015

I think it goes under the rear diff but I've never used that. I always use the factory jacking points to jack up the car

WARP TEN · 08-16-2015

Marc Haibeck used to make and sell jack adapters for use on the rear spring. I don't know that he still does, but you might contact him to see if he has one still. (www.zr1specialist.com). --Bob

Jagdpanzer · 08-16-2015

I had good experience with the C4 EZ-Jack-Adapter from the GadgetMan:

http://www.corvettegadgetman.com/products3.html

BlackZR1 · 08-16-2015

Thanks for your feedback Kevin, WARP TEN and Jagpanzer

Kevin · 08-16-2015

Quote:

Originally Posted by Jagdpanzer

I had good experience with the C4 EZ-Jack-Adapter from the GadgetMan:

http://www.corvettegadgetman.com/products3.html

yep, that's what i was thinking about

08-15-2015	#1
BlackZR1 Join Date: Aug 2015 Location: Pittsburgh, PA Posts: 152	Quick Car Lift Question "Solutions" describe lifting the rear: "A Steel adapter has been designed and proven safe to lift the rear axle directly under the center of the rear spring mount using a floor jack." "The pipe adapter is captured between the rear spring mount bolts" If I read this correctly, and looking at my car. the adapter will be in contact with the spring itself correct? Thanks, Roger

08-15-2015	#2
Kevin Join Date: Jun 2005 Location: pittsburgh Posts: 4,633	Re: Quick Car Lift Question I think it goes under the rear diff but I've never used that. I always use the factory jacking points to jack up the car __________________ It's not the car, it's the people - Doug Johnson 90 r/r "KEYS ON" nick named "T.L.B"

08-16-2015	#3
WARP TEN Join Date: Apr 2007 Location: Lake Bluff, IL Posts: 2,058	Re: Quick Car Lift Question Marc Haibeck used to make and sell jack adapters for use on the rear spring. I don't know that he still does, but you might contact him to see if he has one still. (www.zr1specialist.com). --Bob __________________ 2016 Long Beach Red Z06 #10281 "POPS Z" 1995 Polo Green #409 "WARP TEN"--Haibeck 350/510 package, 4.10s, Hurst, Stock Exhaust with QTP Cutouts --Sold but still running strong 1993 Quasar Blue #161 "HIL KING" --Sold but still running strong, now with more than 120,000 miles 1967 Marlboro Maroon/Saddle Corvette Coupe 300 hp/4-spd --Sold a long time ago ZR-1 Net Registry Founding Member #95 NCM Lifetime Member Favorite Quote--Attributed to Mickey Thompson: "Too Much Horsepower is Almost Enough"

08-16-2015	#4
Jagdpanzer Join Date: Apr 2007 Location: Northern VA Posts: 2,651	Re: Quick Car Lift Question I had good experience with the C4 EZ-Jack-Adapter from the GadgetMan: http://www.corvettegadgetman.com/products3.html __________________ Phil Wasinger 1994 Torch Red ZR-1 WAZOO Member George Braml Intake

08-16-2015	#5
BlackZR1 Join Date: Aug 2015 Location: Pittsburgh, PA Posts: 152	Re: Quick Car Lift Question Thanks for your feedback Kevin, WARP TEN and Jagpanzer