FX3 shock actuators - Page 3 - ZR-1 Net Registry Forums

Paul Workman · 11-07-2014

Quote:

Originally Posted by GOLDCYLON

No. Don't fix em unless they break

Yeah, DITTOS.

OP, Someone here might have one you can buy for less. OR, check ebay for one/some. I just replaced one of mine a couple weeks ago from =Jeff= (on this board). He had one; may has another?

GOLDCYLON · 11-07-2014

Here is a resource for repair. I have never used the service however and they do sell the metal retainer clips as well. GC

http://www.captainzcnc.com/

orthodoct · 11-24-2014

I broke one in a pothole and had it rebuilt by captainzcnc. Got CNC'ed gears to top shocks where they attach to actuators. Cast pot metals ones are very fragile. Work perfectly. Installing new gear on top of shock is tricky due to tiny pin that fixes gear in place. Used roll punches for an AR15 lower assembly available from Brownells to start them

11-07-2014	#22
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,153	Re: FX3 shock actuators Here is a resource for repair. I have never used the service however and they do sell the metal retainer clips as well. GC http://www.captainzcnc.com/ __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V

11-24-2014	#23
orthodoct Join Date: Aug 2014 Location: Crossville, TN Posts: 88	Re: FX3 shock actuators I broke one in a pothole and had it rebuilt by captainzcnc. Got CNC'ed gears to top shocks where they attach to actuators. Cast pot metals ones are very fragile. Work perfectly. Installing new gear on top of shock is tricky due to tiny pin that fixes gear in place. Used roll punches for an AR15 lower assembly available from Brownells to start them