NEW SPRAY ON FILM (CAR BRA STYLE) FROM 3M - ZR-1 Net Registry Forums

WB9MCW · 05-15-2014

Paint Defender Spray Film by 3M is a spray-on paint protection film that protects your car’s paint against rock chips, bugs, sand, and other everyday driving hazards, similar to clear bra products. The difference is that this protection film is applied in three easy steps of masking the vehicle, waxing the paint to protect and spraying the Paint Defender Spray Film onto the car. Once dry, the film will protect for at least one year and can be removed by hand at any time.

http://3mauto.com/products/paint-def...ton_top_lerft/

See the video on the page above.

I wonder what everyone thinks about this solution from 3M?

Scrrem · 05-15-2014

I have a few of my Harley friends that used it on their painted fairings, seems to do a good job. Not sure about hte removal task through.
Rich

Schrade · 05-28-2014

I have total faith in 3M (a little interest too)...

But since the stuff is 30+ % water, it seems strange how it will bond to waxed paint.

MSDS for Paint Defender Spray Film

Ingredient C.A.S. No. % by Wt
Water 7732-18-5 30 - 60
Polyurethane Polymer Trade Secret 10 - 30
Dimethyl Ether 115-10-6 10 - 30
3(2H)-Isothiazolone, 5-chloro-2-methyl-, mixt. with 2-methyl-3(2H)-isothiazolone 55965-84-9 < 0.01

Z51JEFF · 07-06-2014

Im going to look into this,Im always looking at ways to protect the paint.Would like to do the areas on the front fender panels,rockers and lower rear bumper.I thought about making some small clear guards behind each wheels but that might look to goofy.

05-15-2014	#1
WB9MCW Join Date: Dec 2003 Location: McHenry, Il. Posts: 6,607	NEW SPRAY ON FILM (CAR BRA STYLE) FROM 3M Paint Defender Spray Film by 3M is a spray-on paint protection film that protects your car’s paint against rock chips, bugs, sand, and other everyday driving hazards, similar to clear bra products. The difference is that this protection film is applied in three easy steps of masking the vehicle, waxing the paint to protect and spraying the Paint Defender Spray Film onto the car. Once dry, the film will protect for at least one year and can be removed by hand at any time. http://3mauto.com/products/paint-def...ton_top_lerft/ See the video on the page above. I wonder what everyone thinks about this solution from 3M? __________________ http://i119.photobucket.com/albums/o...9mcw/SIG-2.jpg http://i119.photobucket.com/albums/o128/wb9mcw/vcm.gif "The Budget should be balanced, the Treasury should be refilled, public debt should be reduced, the arrogance of officialdom should be tempered and controlled, and the assistance to foreign lands should be curtailed, lest Rome will become bankrupt. People must again learn to work instead of living on public assistance." - Cicero, 55 BC " We the people are the rightful masters of both Congress and the courts, not to overthrow the Constitution but to overthrow the men who pervert the Constitution." - Abraham Lincoln

05-15-2014	#2
Scrrem Join Date: Feb 2009 Location: Alexandria, Virginia Posts: 1,467	Re: NEW SPRAY ON FILM (CAR BRA STYLE) FROM 3M I have a few of my Harley friends that used it on their painted fairings, seems to do a good job. Not sure about hte removal task through. Rich __________________ 1990 Bright Red Coupe #608 380 Stroker, Ported Heads/Intake/Housings/TB Haibeck Secondary Delete Chip / Pete's Cams George Braml Intake / FIC Injectors Coated SW Headers / Corsa Bill Boudreau B/B ZF6 / Viper 4.10 gears Ron Davis Radiator Pioneer AVIC-Z140BH NAV Fikse FM5's 285 / 335 / C6 Brakes WAZOO Member

05-28-2014	#3
Schrade Join Date: Dec 2012 Location: NC Posts: 1,786	Re: NEW SPRAY ON FILM (CAR BRA STYLE) FROM 3M I have total faith in 3M (a little interest too)... But since the stuff is 30+ % water, it seems strange how it will bond to waxed paint. MSDS for Paint Defender Spray Film Ingredient C.A.S. No. % by Wt Water 7732-18-5 30 - 60 Polyurethane Polymer Trade Secret 10 - 30 Dimethyl Ether 115-10-6 10 - 30 3(2H)-Isothiazolone, 5-chloro-2-methyl-, mixt. with 2-methyl-3(2H)-isothiazolone 55965-84-9 < 0.01 __________________ I'm getting my snappics / threads removed blindly as fast as I can, to get in compliance with copyright / license TOS on the boards here (lots of FSM pages and other copyright / license violations on my part; sorry guys). And thanks to all the guys who didn't whine when I posted those FSM copyrighted / licensed stuff in my threads... ( :thumbsup: [b]and to think I complied with a mod's request to delete a pic of him in a Challenge Car in NCM Museum, so he wouldn't get in hot water)[/b] Thanks to several guys here for sending parts FREE; BearlyFlying, WeGone, Geezer, GoldCylon, and more there, TonyD, mike100, fletchusmc... 1990 #2794; 4L60e Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless, Power Effects 3" [IMG]https://lh5.googleusercontent.com/-GHpfzty7DVU/UQn-0Ru2xAI/AAAAAAAAA14/08mz1p4QLD4/s445/Screenshot-5.png[/IMG]

07-06-2014	#4
Z51JEFF Join Date: Dec 2007 Location: Fremont,Ca Posts: 3,074	Re: NEW SPRAY ON FILM (CAR BRA STYLE) FROM 3M Im going to look into this,Im always looking at ways to protect the paint.Would like to do the areas on the front fender panels,rockers and lower rear bumper.I thought about making some small clear guards behind each wheels but that might look to goofy.