|
06-07-2014
|
#1 |
 Join Date: Feb 2014
Location: AZ
Posts: 857
|
What do I need for header install?
Hey guys,
OBX headers are on the way. I understand that I need some sort of extension for the O2 sensors and some sort of mod for the dipstick. Help with specifics? Thanks in advance! |
|
|
|
06-07-2014
|
#2 | |
|
Join Date: Mar 2010
Location: Fort Worth, TX
Posts: 391
|
Re: What do I need for header install?
Quote:
|
|
|
|
|
|
06-08-2014
|
#3 |
|
Join Date: Dec 2012
Location: Ponoka, Alberta, Canada
Posts: 158
|
Re: What do I need for header install?
" What do I need for header install"
MONEY..... Because then it's an upgraded exhaust.... A port job..... a couple of cams....a New chip.... new half shafts....... Maybe a new rear end ratio.....Then tires..... Then more tires.... It's a disease with No known cure...But You will have a smile on your face. |
|
|
|
|
06-08-2014
|
#4 |
 
Join Date: Nov 2007
Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri
Posts: 6,466
|
Re: What do I need for header install?
I've made a few dozen of the dipstick brackets for guys installing headers. I just finished a batch. They're pretty simple, but work like a charm - one PIA you'll not have after you install the headers!
So, if you need one, PM me with your address. Paul |
|
|
|
|
06-08-2014
|
#5 | |
|
Join Date: Dec 2012
Location: NC
Posts: 1,783
|
Re: What do I need for header install?
Quote:
|
|
|
|
|
|
06-08-2014
|
#6 |
 Join Date: Nov 2011
Location: Dunbarton NH
Posts: 7,540
|
Re: What do I need for header install?
Buy Paul's dipstick relocation bracket.
My headers rubbed on my stering shaft. We ended up jacking the motor and shimming the motor mounts. |
|
|
|
|
06-08-2014
|
#7 | |
|
Join Date: Feb 2014
Location: AZ
Posts: 857
|
Re: What do I need for header install?
Quote:
|
|
|
|
|
|
06-08-2014
|
#8 |
 
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,120
|
Re: What do I need for header install?
Don't forget swain coating. It's worth it
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director  91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
|
|
|
|
06-08-2014
|
#9 | |
|
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,120
|
Re: What do I need for header install?
Quote:
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
|
|
|
|
|
06-12-2014
|
#10 |
|
Join Date: Feb 2014
Location: AZ
Posts: 857
|
Re: What do I need for header install?
Thanks for your help on the dipstick bracket, Paul!
Can anyone tell me exactly what I need for the O2 sensors? Thanks! |
|
|
|
 |
|
|
Linear Mode
