Rear Hatch Weatherstrip - ZR-1 Net Registry Forums

Hammer · 06-04-2007

It looks like my rear hatch weatherstrip could use replacing. Not too bad, just needs replacing. I found this on ebay and am curious what everybody thinks about it. Has anyone ever used it? Where would a person go to get some weatherstripping if it isn't any good.
Thanks

http://cgi.ebay.com/ebaymotors/1991-...mZ190107151766

06-04-2007

John, on the rear hatch weather strip I insist on GM pieces. The aftermarket ones seem to always be a little "short" and don't fit right.

Hammer · 06-04-2007

Quote:

Originally Posted by Jeffvette

John, on the rear hatch weather strip I insist on GM pieces. The aftermarket ones seem to always be a little "short" and don't fit right.

Hi Jeff,

You have a source for those or just get 'em at Chevy?

jonszr1 · 06-04-2007

has anyone tried one of this guys pieces . the reenforceing in the corners sound good maybe there is a quality guy for these. just thought to ask

06-05-2007

Quote:

Originally Posted by Hammer

Hi Jeff,

You have a source for those or just get 'em at Chevy?

I get mine at the dealership.

Jim Nolan · 06-05-2007

I changed mine with a GM replacement. I changed it by my self, but would have had an easier time of it had I had somebody to give me a hand. Just a little messy.

Tim · 06-05-2007

Mine needs replacing too. Is the one at mid america comparable in quality and price? Do they come with adhesive? How long does the replacement take for the average curb side mechanic. Thanks all. And thanks for the great people here.

evl_twn · 06-05-2007

I got mine (GM factory part) through Mid-America last year at Funfest (10% off), and it's a pretty easy job. Remove rear plastic trim pieces, remove the old weatherstrip, slide the new one in place, replace trim pieces. You'll need to undo the hatch struts one at a time to get the new weatherstrip in place. I did this by myself, wasn't that bad at all and took less than an hour. No sealer is needed, just remove the old one and slide the new one on. It does go a bit easier if you lay out the new weatherstrip in the sun for a bit to soften it up first.

bldavis11 · 06-05-2007

Quote:

Originally Posted by Hammer

It looks like my rear hatch weatherstrip could use replacing. Not too bad, just needs replacing. I found this on ebay and am curious what everybody thinks about it. Has anyone ever used it? Where would a person go to get some weatherstripping if it isn't any good.
Thanks

http://cgi.ebay.com/ebaymotors/1991-...mZ190107151766

I purchased a few pieces through Corvette Rubber. The outer door seals were GM. The door weatherstrips themselves were not in a GM package, but everything fit perfectly.

zr-1assassin · 06-06-2007

Quote:

Originally Posted by Hammer

It looks like my rear hatch weatherstrip could use replacing. Not too bad, just needs replacing. I found this on ebay and am curious what everybody thinks about it. Has anyone ever used it? Where would a person go to get some weatherstripping if it isn't any good.
Thanks

http://cgi.ebay.com/ebaymotors/1991-...mZ190107151766

i just replaced mine with one off of ebay and i was realy suprised at the fit! i was wondering the same thing as you when i got mine, save the money and give it a try.

or you can get it from the general and pay $50 for the stripping and another $100 for the name

06-04-2007	#1
Hammer Join Date: Apr 2006 Location: Ideho Posts: 2,653	Rear Hatch Weatherstrip It looks like my rear hatch weatherstrip could use replacing. Not too bad, just needs replacing. I found this on ebay and am curious what everybody thinks about it. Has anyone ever used it? Where would a person go to get some weatherstripping if it isn't any good. Thanks http://cgi.ebay.com/ebaymotors/1991-...mZ190107151766 __________________ [I][FONT=Comic Sans MS]John Boyd[/FONT][/I] [I][FONT=Comic Sans MS][SIZE=1]Ideho[/SIZE][/FONT][/I] [FONT=Comic Sans MS][SIZE=1][I]2015 ZL1 [/I][I]Camaro #1121 BLACK/BLACK 6 SPD (540 RWHP)[/I][/SIZE][/FONT] [I][FONT=Comic Sans MS][SIZE=1]1991 ZR-1 #458 [COLOR=red]RED/[/COLOR][COLOR=black]BLACK 72[/COLOR]k miles ([B][COLOR=red]SOLD[/COLOR][/B]) 1991 ZR-1 #473 [COLOR=red]RED/[/COLOR][COLOR=black]BLACK [/COLOR]37k miles ([B][COLOR=red]SOLD[/COLOR][/B])[/SIZE][/FONT][/I]

06-04-2007	#2
Jeffvette Guest Posts: n/a	Re: Rear Hatch Weatherstrip John, on the rear hatch weather strip I insist on GM pieces. The aftermarket ones seem to always be a little "short" and don't fit right.

06-04-2007	#4
jonszr1 Join Date: Sep 2006 Location: lone pine and mammoth lakes Posts: 1,407	Re: Rear Hatch Weatherstrip has anyone tried one of this guys pieces . the reenforceing in the corners sound good maybe there is a quality guy for these. just thought to ask

06-05-2007	#6
Jim Nolan Join Date: Jan 2007 Location: Florida Posts: 241	Re: Rear Hatch Weatherstrip I changed mine with a GM replacement. I changed it by my self, but would have had an easier time of it had I had somebody to give me a hand. Just a little messy.

06-05-2007	#7
Tim Join Date: Aug 2004 Location: ND Posts: 87	Re: Rear Hatch Weatherstrip Mine needs replacing too. Is the one at mid america comparable in quality and price? Do they come with adhesive? How long does the replacement take for the average curb side mechanic. Thanks all. And thanks for the great people here. __________________ THanks, Tim

06-05-2007	#8
evl_twn Join Date: Jul 2006 Location: Tennessee Posts: 116	Re: Rear Hatch Weatherstrip I got mine (GM factory part) through Mid-America last year at Funfest (10% off), and it's a pretty easy job. Remove rear plastic trim pieces, remove the old weatherstrip, slide the new one in place, replace trim pieces. You'll need to undo the hatch struts one at a time to get the new weatherstrip in place. I did this by myself, wasn't that bad at all and took less than an hour. No sealer is needed, just remove the old one and slide the new one on. It does go a bit easier if you lay out the new weatherstrip in the sun for a bit to soften it up first.