Lift King 9000 - ZR-1 Net Registry Forums

Bearly Flying · 05-09-2014

I just had a Lift King 9000 lb 4 post lift installed in the garage.

Initial impressions are good. Columns are nice and heavy, with 10 different lock heights. The top position has a set of pins that can be installed as a secondary safety.

It comes complete with castors that pin on for moving the lift, a heavy duty jack tray rated for the full capacity of the lift, 3 drip trays and a tarp that can be attached underneath the runways to further protect the lower car.

The only modification I had to do was the front safety stops were too high and the Air Dam wouldn't clear. I redrilled 2 holes on each plate and lowered them by 2 inches. Another nice feature is when you take the approach ramps off, there is a set of Safety Stops that drop into the socket where the ramps attach.

Luckily I have 10 ft ceilings in the Garage and can utilize the full height of the lift. it is 74 inches to the top of the runways in full up position.

With 3 cars, 2 motorcycles and a herd of RC Aircraft Shop space was getting crowded.

hotrodeddy · 05-09-2014

I bought a backyard buddy lift a few years ago and use it for many jobs. one of my most used tools.

Blue Flame Restorations · 05-12-2014

I have a 9k lift and I'm very happy with it. Ready to buy another one.

05-09-2014	#1
Bearly Flying Join Date: Dec 2012 Location: Ponoka, Alberta, Canada Posts: 158	Lift King 9000 I just had a Lift King 9000 lb 4 post lift installed in the garage. Initial impressions are good. Columns are nice and heavy, with 10 different lock heights. The top position has a set of pins that can be installed as a secondary safety. It comes complete with castors that pin on for moving the lift, a heavy duty jack tray rated for the full capacity of the lift, 3 drip trays and a tarp that can be attached underneath the runways to further protect the lower car. The only modification I had to do was the front safety stops were too high and the Air Dam wouldn't clear. I redrilled 2 holes on each plate and lowered them by 2 inches. Another nice feature is when you take the approach ramps off, there is a set of Safety Stops that drop into the socket where the ramps attach. Luckily I have 10 ft ceilings in the Garage and can utilize the full height of the lift. it is 74 inches to the top of the runways in full up position. With 3 cars, 2 motorcycles and a herd of RC Aircraft Shop space was getting crowded. __________________ 91 ZR-1 Arctic White/Gray 01 C-5 Magnetic Red/Black 85 FJ 1100 (Big Bore kit, Hooligan Bike) 05 FJR 1300 Yamaha (Long Distance, Sport Touring) And a whole whack of RC Planes

05-09-2014	#2
hotrodeddy Join Date: Feb 2013 Location: michigan Posts: 10	Re: Lift King 9000 I bought a backyard buddy lift a few years ago and use it for many jobs. one of my most used tools.

05-12-2014	#3
Blue Flame Restorations Join Date: Feb 2010 Location: Pendleton, IN Posts: 3,904	Re: Lift King 9000 I have a 9k lift and I'm very happy with it. Ready to buy another one. __________________ 1988 KOH Prototype EX5023 sold 1990 ZR-1 #444 Convertible 1990 ZR-1 Black #966 1991 ZR-1 Quazar Blue #296 1957 Duntov SS Project