![]() |
#21 | ||
Join Date: Dec 2012
Location: NC
Posts: 1,786
|
![]() Quote:
Maybe like THIS: https://www.youtube.com/watch?v=O9KQQrNDawM Anyway here - Quote:
![]() I'm on it. Anyone got an extra PCV-to-plenum inlet pipe that I can hack? And would Scotch-Brite make for a good filter membrane??? Maybe just a hose by-pass for trial engineering fab-hack... The drain plumbing by default will be tricky here..................... I'm gonna' get on [something] it here... --------------------------------------------------------------------------- Now, if someone would just address the hesitation that Marc said ALL LT5's have; but who will try to write to, or patch the ECM coding?
__________________
I'm getting my snappics / threads removed blindly as fast as I can, to get in compliance with copyright / license TOS on the boards here (lots of FSM pages and other copyright / license violations on my part; sorry guys). And thanks to all the guys who didn't whine when I posted those FSM copyrighted / licensed stuff in my threads... ( :thumbsup: [b]and to think I complied with a mod's request to delete a pic of him in a Challenge Car in NCM Museum, so he wouldn't get in hot water)[/b] Thanks to several guys here for sending parts FREE; BearlyFlying, WeGone, Geezer, GoldCylon, and more there, TonyD, mike100, fletchusmc... 1990 #2794; 4L60e Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless, Power Effects 3" [IMG]https://lh5.googleusercontent.com/-GHpfzty7DVU/UQn-0Ru2xAI/AAAAAAAAA14/08mz1p4QLD4/s445/Screenshot-5.png[/IMG] |
||
![]() |
![]() |
![]() |
#22 |
![]() ![]() Join Date: Aug 2009
Location: South Dakota/California
Posts: 3,794
|
![]()
I guessed at the 10 TBS.....it was less than an inch of oil in the bottom of the Oil Catch Can.......and the Catch Can is maybe 6 inches high.
|
![]() |
![]() |
![]() |
#23 |
![]() Join Date: May 2013
Location: Beaver, PA
Posts: 516
|
![]()
OK - someone HAS focused on 'when to empty' the can.
![]() would Scotch-Brite make for a good filter membrane Chuck, I have a sight glass on the side of my can to check the oil level. I used Scotch Brite stainless steel pads as a filter element. I like the one Xfire is using too. Looks like an air compressor air/oil separator that I use for painting cars. Not too complex and is clear for visual inspection. I will dump any oil into my recycle container. |
![]() |
![]() |
![]() |
|
|