05-18-2005 | #1 |
Join Date: Apr 2005
Location: The Netherlands
Posts: 8
|
Big change in dimensions
Hi, I have a question for the people out there who know ZR-1's. On the website of which this is the forum, they aren't consequent and conclusive on the information concerning the dimensions of the ZR-1 throughout the years.
I emailed the person who moderates the site on some of the mistakes on the site, which he changed, but only partly. Here's the thing: The length of the car changed between 1990 and 1991 due to the different front end, however the width and height of the car also changed. But the site's 'dimensions' section says it's between 91 and 92, while the 'FAQ' section says it's between 92 and 93. I contacted the moderator on this, but he hasn't written me back. Now my question: which is correct? When did the ZR-1 change it's exterior dimensions? Thanks, Dominic |
05-26-2005 | #2 | |
Join Date: Jan 2004
Location: Alex VA
Posts: 1,087
|
Re: Big change in dimensions
Quote:
all else the same IMHO, but I don't know. I've had a 90, 93, 2X 95, never noticed anything.
__________________
95 390 LPE ZR1 (505 rwhp) LSV = Lingenfelter Super Vette Twin Turbo 2003 Z06 (800 RWHP) |
|
05-26-2005 | #3 |
Join Date: Apr 2005
Location: Tallahassee, FL
Posts: 17
|
According to Mike Antonick's book "Corvette Specs 1984-1996" the dimensions are as follows:
----1990--- 1991-- 1992--- 1993--- 1994--- 1995 W-- 71.0--- 71.0--- 73.1*-- 73.1*-- 73.1*-- 73.1* L-- 178.5-- 178.5-- 178.5-- 178.5-- 178.5-- 178.5 H-- 46.7--- 46.7-- - 46.3--- 46.3---- 46.3---- 46.3 Measured in inches. * He lists these dimensions as ZR-1 specific for these four years but not for 1990 and 1991. But I'm sure they apply to the first two years also.
__________________
Don 1990 Dark Red Metallic #1587 |
05-27-2005 | #4 | |
Join Date: Jan 2004
Location: Alex VA
Posts: 1,087
|
Quote:
__________________
95 390 LPE ZR1 (505 rwhp) LSV = Lingenfelter Super Vette Twin Turbo 2003 Z06 (800 RWHP) |
|
|
|