![]() |
#1 |
Join Date: Dec 2007
Location: Fremont,Ca
Posts: 3,057
|
![]()
Ive got a 63 Nova Convertible Im putting an alarm in Ive got a few question.For the starter interrupt Ive got 3 wires.The green/white wire is for the starter [key side] the green wire is for the starter normally open motor side and the green/black wire is for the starter normally closed.Im under the impression the green/white wire Ts into one wire and the green-green/white wire ties into one wire that runs through the alarm controller and back into the cars wiring harness,does this sound about right?Thanks.
|
![]() |
![]() |
![]() |
#2 |
![]() Join Date: May 2013
Location: Beaver, PA
Posts: 516
|
![]()
What brand of alarm system is it?
|
![]() |
![]() |
![]() |
#3 |
Join Date: Dec 2007
Location: Fremont,Ca
Posts: 3,057
|
![]() |
![]() |
![]() |
![]() |
#4 |
![]() Join Date: May 2013
Location: Beaver, PA
Posts: 516
|
![]()
Looks like Directed Electronics does not provide a Clifford 330.3x wiring diagram to the general public. They do provide one for their dealer installers. Is this a DIY kit?
|
![]() |
![]() |
![]() |
#5 |
Join Date: Dec 2007
Location: Fremont,Ca
Posts: 3,057
|
![]()
It is now.Ive put alarms in my cars in the past but its been years,this new one I have is pretty elaborate.
|
![]() |
![]() |
![]() |
|
|