![]() |
#11 |
![]() Join Date: Jul 2013
Location: Central Iowa
Posts: 190
|
![]()
I think about everything is sorted out now - except the A/C. Keeps blowing fuses and can't find where the problem is.
__________________
[CENTER][SIZE=4][COLOR=red]1990 ZR-1 Red / Red[/COLOR][/SIZE][/CENTER] |
![]() |
![]() |
![]() |
#12 |
![]() Join Date: Feb 2006
Location: San Antonio area
Posts: 1,179
|
![]()
Check the resistance of the AC compressor coil first - should be about 3.4 ohms.
When that fuse blows, you get SYS messages and not much else works either.
__________________
“Buy the best example of what you want, and pay whatever it takes. That way, you cry only once.” ~ Bruce Meyer |
![]() |
![]() |
![]() |
#13 |
Join Date: Jun 2009
Location: I live at Devens, one run at a time
Posts: 455
|
![]()
I will say that I've found a few things "autocross related" worth mentioning:
- door switches will indicate "door open" in spirited cornering ![]() - doesn't take much stress for battery connection to be "iffy" and give intermittent "sys" - hub play can lead to ABS light I always thought "I never kick into ABS", learned different when one day the only spare hub I had was from the '88. Boy did I ever make some flat spots that day. Sounds like you're on the right track though. Cheers, - Jeff
__________________
[I]91 ZR-1 #1840, autocrossing in SCCA BSP. FIC S/S's DRM chip/Watson/Borla/lid/LW batt&headlights, springs, shocks, pads & lines, quick rack & Turn One, camber brace, 32/22mm sways, A/C halfway deleted 17x11 & 12 CCW's, 315 & 335 Hoosier A6s [/I] |
![]() |
![]() |
![]() |
#14 | |
![]() Join Date: Jul 2013
Location: Central Iowa
Posts: 190
|
![]() Quote:
By the way, here's a pic from the other weekend. It was kind of funny, somebody took this pic right as I realized my ABS was gone - it looks like I slid a little right as this was taken - I'm a long ways from the near side cone! ABS or not, I had a great time and the car performed very well. Now the driver - lots to learn and having fun doing it! ![]()
__________________
[CENTER][SIZE=4][COLOR=red]1990 ZR-1 Red / Red[/COLOR][/SIZE][/CENTER] |
|
![]() |
![]() |
![]() |
#15 | |
![]() Join Date: Feb 2006
Location: San Antonio area
Posts: 1,179
|
![]() Quote:
Replacing the bearing and coil fixed the problem. Did not have to replace the compressor assembly at a much higher cost - phew ...
__________________
“Buy the best example of what you want, and pay whatever it takes. That way, you cry only once.” ~ Bruce Meyer |
|
![]() |
![]() |
![]() |
Tags |
abs fx3 electrical |
|
|