|
07-21-2013
|
#1 |
 
Join Date: Nov 2011
Location: Salt Lake City, Utah
Posts: 169
|
A Pilar Gauges
I am looking a putting a couple of gauges on my A pillar. I know that I want a fuel preasure gauge. My question is what kind to get, and where does it get its information (sending unit)? I would also like to get an air/fuel gauge. Same question. Where does it get its information. I like looking and your instalations!
Thanks Chris
__________________
91 ZR-1 Red on Red #922 |
|
|
|
07-22-2013
|
#2 |
 
Join Date: Jul 2005
Location: Cresson, TX
Posts: 970
|
Re: A Pilar Gauges
Chris,
My Pillar mounted fuel gage gets an electrical signal from a sender that's attached via the fuel rail. I have a SS Braided line attached the end of the Fuel Rail and it runs back behind the engine where the sender is. From there it runs to the pillar. I don't have an AFR however you'll need a WB O2. There are kits out there that will have it all... My car's at the hangar so I can't run out and see the gage type. Cheers,
__________________
Ron Hanselman Founding Member #80 CM Lifetime Member #1093 1991 #383 Twin Turbo 1993 #099 Ruby, Jeal 368 w/Snake Skinner body 1961 White with Red Int |
|
|
|
|
07-22-2013
|
#3 | |
   
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
|
Re: A Pilar Gauges
Quote:
Some ideas http://www.zr1.net/forum/showthread....ghlight=pillar
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director  91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
|
|
|
|
 |
|
|
Linear Mode
