Ported Intake for Sale - ZR-1 Net Registry Forums

Locobob · 06-18-2013

Ported 91 (will fit 90-92) Plenum and Injector Housings
Bolt on 20+ rear wheel horsepower!
$1500 outright or $900 + exchange for your unported parts

GOLDCYLON · 06-18-2013

Bob what level of port is this ?

Locobob · 06-18-2013

Quote:

Originally Posted by GOLDCYLON

Bob what level of port is this ?

This is designed to go on a stock or mildly modded 350 cid. Pretty much anything else is going to have ported heads and you'd want to match the intake to the head porting. It's 36+mm throughout except for the primary runners which funnel down from 36mm about half way down the injector housings to 34mm where it meets the head - stock primary head ports are 32mm at the gasket surface.

Jagdpanzer · 06-18-2013

Robert,
Excellent work!
Tell us how you managed to finish the runners inside the plenum?

Locobob · 06-18-2013

Quote:

Originally Posted by Jagdpanzer

Robert,
Excellent work!
Tell us how you managed to finish the runners inside the plenum?

Trade secret

.
.
.
.
.
.
.
.
Well okay.... this pic should explain it... and yes it is a very time consuming pain in the *** to do.

batchman · 06-19-2013

Quote:

Originally Posted by Locobob

It's 36+mm throughout except for the primary runners which funnel down from 36mm about half way down the injector housings to 34mm where it meets the head - stock primary head ports are 32mm at the gasket surface.

Nice work. How about a dumb Q from a guy who has to sweat class rules.

If primary head port is 32mm, what is secondary head port size (stock)?

I ask because I'm limited with respect to work in the head, can only go in one inch. That would seem to be enough to take up the 32 to 34mm...

Hmmm... Mo Powah - tasty!
- Jeff

Locobob · 06-20-2013

Quote:

Originally Posted by batchman

Nice work. How about a dumb Q from a guy who has to sweat class rules.

If primary head port is 32mm, what is secondary head port size (stock)?

I ask because I'm limited with respect to work in the head, can only go in one inch. That would seem to be enough to take up the 32 to 34mm...

Hmmm... Mo Powah - tasty!
- Jeff

The secondary head ports at the gasket surface are a hair over 36mm stock - this is where the secondary butterfly valves are and they take up some space so a "bulge" here was part of the design to compensate.

FU · 06-20-2013

Me likey

Locobob · 06-20-2013

Quote:

Originally Posted by FU2

Me likey

Trade ya for that 440 Frank...

Locobob · 07-06-2013

Forgot to mention that I went ahead and opened up the plenum throttle bores to 2.5in so if you have or may get a 63mm throttle body someday you'll be good to go with this.

06-18-2013	#1
Locobob Join Date: Jan 2004 Location: Portland, OR Posts: 1,047	Ported Intake for Sale Ported 91 (will fit 90-92) Plenum and Injector Housings Bolt on 20+ rear wheel horsepower! $1500 outright or $900 + exchange for your unported parts __________________ Robert ZR-1 Net Registry Oregon State Director 91 ZR-1 #431 Black/Black LPE 368 Last edited by Locobob; 06-18-2013 at 04:14 PM.

06-18-2013	#2
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,120	Re: Ported Intake for Sale Bob what level of port is this ? __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V

06-18-2013	#4
Jagdpanzer Join Date: Apr 2007 Location: Northern VA Posts: 2,646	Re: Ported Intake for Sale Robert, Excellent work! Tell us how you managed to finish the runners inside the plenum? __________________ Phil Wasinger 1994 Torch Red ZR-1 WAZOO Member George Braml Intake

06-20-2013	#8
FU Join Date: Mar 2004 Location: Found Member Posts: 4,327	Re: Ported Intake for Sale Me likey

07-06-2013	#10
Locobob Join Date: Jan 2004 Location: Portland, OR Posts: 1,047	Re: Ported Intake for Sale Forgot to mention that I went ahead and opened up the plenum throttle bores to 2.5in so if you have or may get a 63mm throttle body someday you'll be good to go with this. __________________ Robert ZR-1 Net Registry Oregon State Director 91 ZR-1 #431 Black/Black LPE 368