C4 Chassis Stiffeners from Killebrew

[VetteMed]

Originally Posted by secondchance

Ricky,

Have the bottom stitch welded before install. Back in 93 I had it installed stock and was not completely stisfied. Took it to Corvette Masters in Maitland, Fl, had Robbie weld plates and close it off - a world of difference.

Great info, Yun. Was the brace dismounted then welded, then reinstalled?

[secondchance]

Originally Posted by VetteMed

Great info, Yun. Was the brace dismounted then welded, then reinstalled?

Yes. If I remember correct, at least for the 91 I had at the time, front had holes needed. For the rear, a bolt had to be welded to a plate then the plate welded to the frame.
Dismounted, bottom pieces welded continuous over the "X", effectively making the whole thing one piece, then bolted to the car.

[RICKYRJ1]

Originally Posted by secondchance

Ricky,

Have the bottom stitch welded before install. Back in 93 I had it installed stock and was not completely stisfied. Took it to Corvette Masters in Maitland, Fl, had Robbie weld plates and close it off - a world of difference.

Thanks, I will pass the info onto George B. our WAZOO master metal man.