|
06-29-2011
|
#1 |
Join Date: Jun 2011
Location: Michigan
Posts: 7
|
New zr1
Bought a 1991 zr1 72000 miles at the auction looking for shop in Michigan that works on the zr1 do not want to travel to I'll does anybody have any suggestions
|
|
|
|
06-29-2011
|
#2 |
  
Join Date: Jun 2005
Location: pittsburgh
Posts: 4,632
|
Re: New zr1
closest i know of, and arguably the best is Mark Haibek in chicago. Why do you need to take the zr-1 to the shop? if you let us know the problems you're having we can probably help you
__________________
It's not the car, it's the people - Doug Johnson 90 r/r "KEYS ON" nick named "T.L.B" |
|
|
|
|
06-29-2011
|
#3 |
|
Join Date: Jun 2011
Location: Michigan
Posts: 7
|
Re: New zr1
Would like to have it checked over it is over heating in traffic and has small oil leak I do not know much about the older cars I ALSo have 2008 zo6
|
|
|
|
|
06-29-2011
|
#4 | |
|
Join Date: Jun 2005
Location: pittsburgh
Posts: 4,632
|
Re: New zr1
Quote:
__________________
It's not the car, it's the people - Doug Johnson 90 r/r "KEYS ON" nick named "T.L.B" |
|
|
|
|
|
06-29-2011
|
#5 |
|
Join Date: Jun 2005
Location: pittsburgh
Posts: 4,632
|
Re: New zr1
should have said this earlier too:
welcome to the brotherhood. you'll find that we really like to take care of each other here
__________________
It's not the car, it's the people - Doug Johnson 90 r/r "KEYS ON" nick named "T.L.B" |
|
|
|
|
06-29-2011
|
#6 | |
Join Date: Dec 2003
Location: S. Florida
Posts: 2,667
|
Re: New zr1
Quote:
 
__________________
--- It is not the critic who counts; not the man who points out how the strong man stumbles, or where the doer of deeds could have done them better. The credit belongs to the man who is actually in the arena, whose face is marred by dust and sweat and blood; who strives valiantly; who errs, who comes short again and again, because there is no effort without error and shortcoming; but who does actually strive to do the deeds; who knows great enthusiasms, the great devotions; who spends himself in a worthy cause; who at the best knows in the end the triumph of high achievement, and who at the worst, if he fails, at least fails while daring greatly, so that his place shall never be with those cold and timid souls who neither know victory nor defeat. Theodore Roosevelt - April 23, 1910 |
|
|
|
|
|
06-29-2011
|
#7 | |
  
Join Date: Nov 2007
Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri
Posts: 6,493
|
Re: New zr1
Quote:
 Less than 1% of the C4s made were ZR-1s, and most of the mechanics at GM dealers have never seen an LT5, let alone work on one. I won't take mine to any of them.As far as the LT5 goes, the motor was bread for racing and has proven to be bullet proof, unless molested by the unwashed/unfamiliar "mechanic". Most of the R&R stuff on the engine seems to center around the vacuum operated secondary throttle system**, the pre-93 OEM injectors, and somewhere above 40k miles, the starter solenoid contacts need to be replaced or cleaned up at least. The motor has flat tappets, so you're going to want to run an oil with enhanced ZDDP additives; e.g., Amsoil AMO 10W-40, or Mobil 1 for older engines (with ZDDP added). The current API "SM" has less of the zinc and phosphorus in it, requiring motors to have roller tappets (like your LS7). **If the vacuum secondary system ever gets to be a pain, you can do like many of us have done and eliminate them and install a specially configured "chip". The result is a much simpler system as the engine runs on all 16 injectors all the time which many (like me) prefer! Here at the Net Registry you'll find very knowledgeable people who can help you with anything you want to know 'bout your find. And, if you need a comprehensive "going over", the world renown ZR-1 Specialist, Marc Haibeck in Addision, IL is closest to you. You don't need no steeenking GM mechanic!! Welcome to the Brotherhood! P.
__________________
Good carz, good food, good friendz = the best of timez! 90 #1202 "FBI" top end ported & relieved Cam timing by "Pete the Greek" Sans secondaries Chip & dyno tuning by Haibeck Automotive SW headers, X-pipe, MF muffs Former Secretary, ZR-1 Net Registry |
|
|
|
|
|
06-29-2011
|
#8 |
Join Date: Dec 2004
Location: Jacksonville, FL USA
Posts: 4,645
|
Re: New zr1
Hi, over at the ZR-1 Net Registry site I found this chart for you. It may be of assistance to give you a sense of what the gauges are telling you about coolant & oil temps.
http://zr1netregistry.com/ZR1_faq.htm Also, not to be a wise guy, but over at the 'mothership' we have an array of How to's, common issues, tips on doing stuff, even a factory TSB data base. I'm not trying to be smart, but when I first got my Z I read thru all of it as it helped me a great deal to get some understanding of the car's quirks and some solutions to them. Tom Sorry I forgot this is the link to our mothership. http://zr1netregistry.com/index.htm
__________________
1990 ZR-1, Black/grey, #2233, stock. ZR-1 Net Reg Founding Member #316 & NCM member |
|
|
|
|
06-29-2011
|
#9 |
|
Join Date: Jun 2011
Location: Michigan
Posts: 7
|
Re: New zr1
its great to get all this good advice I have had many vettes over the years this is my first older one since I had a 1971 in the late 80's other wize they have all been newer, looking forward to fixing this one up like new, also a menber of the captial city corvette club lansing, mi. and thank you all for the welcome the pleasure is all mine
|
|
|
|
|
06-29-2011
|
#10 | |
|
Banned
BANNED
Join Date: Oct 2006
Location: MD
Posts: 3,690
|
Re: New zr1
Quote:
He is "the master" and close to you! David |
|
|
|
|
 |
|
|
Linear Mode
