|
03-23-2011
|
#1 |
|
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,702
|
ZR-1 Chassis w Doors
All,
I'm pretty much at the end of the road parting out #474. I've attached pics of what's left which is still quite a bit but I'm looking to move it out of my garage. If you are interested, let me know and we can discuss. Hatch is sold as is hood. Still has CCM, ABS, fuel tank,electrical harnesses, doors, window glass and windshield, suspension bits. I can give you a laundry list if interested.     
|
|
|
|
03-23-2011
|
#2 |
  
Join Date: Feb 2010
Location: Pendleton, IN
Posts: 3,904
|
Re: ZR-1 Chassis w Doors
Dom, I'd buy the whole thing but I just have no room at the shop. Maybe I can come up and get these parts myself.
Fuel lines from engine to tank with sending unit. All pressure lines under the hood.
__________________
1988 KOH Prototype EX5023 sold 1990 ZR-1 #444 Convertible 1990 ZR-1 Black #966 1991 ZR-1 Quazar Blue #296 1957 Duntov SS Project |
|
|
|
|
03-23-2011
|
#3 | |
|
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,702
|
Re: ZR-1 Chassis w Doors
Quote:
COME ON UP! Your welcome to come and get them. The fuel lines have been cut in the mid section of the car but they could certainly be repaired. Lots of miscellaneous parts are in bins. |
|
|
|
|
|
03-23-2011
|
#4 |
|
Join Date: Feb 2010
Location: Pendleton, IN
Posts: 3,904
|
Re: ZR-1 Chassis w Doors
Maybe we can make arrangements to get the parts. I can take them off unless you just can't help yourself. hahaha
__________________
1988 KOH Prototype EX5023 sold 1990 ZR-1 #444 Convertible 1990 ZR-1 Black #966 1991 ZR-1 Quazar Blue #296 1957 Duntov SS Project |
|
|
|
|
03-25-2011
|
#5 |
|
Join Date: Jun 2010
Location: back in lone pine
Posts: 591
|
Re: ZR-1 Chassis w Doors
dom , do you still have the oil cooler lines that connect the cooler to the oil filter housing and if so do you want to sell them ?
|
|
|
|
|
04-03-2011
|
#6 |
 
Join Date: Jan 2006
Location: Decatur, AL
Posts: 1,119
|
Re: ZR-1 Chassis w Doors
I need ALL the torx bolts and associated clips - both the large head and small rocker torx head- from the front and back wheel house liners and rocker panel 7mm screws and top rocker panel stainless screws, Passenger front top a arm if good, front and rear springs and factory lug nut extension and velcro pouch from console if you have it. AND right rear speed sensor.
corvette95@charter.net
__________________
Corvette95 Registry and Forum (*************) 1989 C4 Conv Wht/Gry Auto Hardtop Top Flight SOLD 1995 C4 Coupe Purple/Blk 6 Speed 1989 C4 Conv Wht/Red Auto SOLD 1996 C4 Conv Black/Tan Auto SOLD 1994 C4 Coupe Wht/Blk SOLD 1995 C4 ZR-1 White/Gry #278 Dual Dunn Head SOLD 1986 C4 Coupe Black/Red 4+3 SOLD 1990 C4 ZR-1 Red/Red #0454 |
|
|
|
|
04-03-2011
|
#7 |
|
Join Date: Feb 2010
Location: Pendleton, IN
Posts: 3,904
|
Re: ZR-1 Chassis w Doors
Dom, how much is missing since the pics were taken? I can use it all. I need everything under the hood. I'll take the whole car.
__________________
1988 KOH Prototype EX5023 sold 1990 ZR-1 #444 Convertible 1990 ZR-1 Black #966 1991 ZR-1 Quazar Blue #296 1957 Duntov SS Project |
|
|
|
|
04-03-2011
|
#8 |
|
Join Date: Jan 2006
Location: Decatur, AL
Posts: 1,119
|
Re: ZR-1 Chassis w Doors
Just let me have my few little parts first!
__________________
Corvette95 Registry and Forum (*************) 1989 C4 Conv Wht/Gry Auto Hardtop Top Flight SOLD 1995 C4 Coupe Purple/Blk 6 Speed 1989 C4 Conv Wht/Red Auto SOLD 1996 C4 Conv Black/Tan Auto SOLD 1994 C4 Coupe Wht/Blk SOLD 1995 C4 ZR-1 White/Gry #278 Dual Dunn Head SOLD 1986 C4 Coupe Black/Red 4+3 SOLD 1990 C4 ZR-1 Red/Red #0454 |
|
|
|
 |
|
|
Linear Mode
