10-02-2009 | #1 |
Join Date: Aug 2008
Location: Houston 90 Red ZR-1
Posts: 2,320
|
Permabond A136
Where to get it or something equivelant.
|
10-02-2009 | #2 |
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
|
Re: Permabond A136
http://www.homershams.co.nz/pdf/Adhe...ves%200705.pdf
http://secure.silmid.com/ENG/product...%20Anaerobics/
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
10-02-2009 | #3 |
Join Date: Dec 2003
Location: Arcadia,OK
Posts: 3,394
|
Re: Permabond A136
Here's a commonly used replacement to the Permabond.
http://jerrysgaskets.com/store/index...products_id=37 You can get it for less. I keep a little on hand for customers in remote areas or those that don't want to chase around town.
__________________
Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 ZR-1, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed. |
10-02-2009 | #4 |
Join Date: Aug 2008
Location: Houston 90 Red ZR-1
Posts: 2,320
|
Re: Permabond A136
Well damn it! I can't get Loctite 518 or Permabond A136. Advanced auto parts said they had 518 and that was a lie. So I asked my Z buddy Lee whats so special about this stuff that just any good gasket seal would'nt work. And he said it's anaerobic. I said what does that mean. He said "HARDENS IN THE ABSENCE OF AIR". So until I get some the only thing I can do right now is re assemble the throttle body and put my injector housings back on.
Once I get started I don't stop until I get it all done. I'll just do what I can right now. |
10-02-2009 | #5 |
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,169
|
Re: Permabond A136
Napa should have it.. Carquest too I think
__________________
1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978 |
10-02-2009 | #6 |
Join Date: Dec 2003
Location: Chicagoland,IL
Posts: 2,679
|
Re: Permabond A136
Rick,it's your fualt for living so far from me i have a bunch of it in my garage if you were closer you were more then welcome to it
My freaking garage is like an LT5 parts warehouse Pete
__________________
'91 #1635 PoloGreen 350 LT5 11.09 @ 129.27 11.04 @ 128.86 474RWHP 400RWTQ http://www.youtube.com/watch?v=SFNFOhGGlR4 http://www.youtube.com/watch?v=ZlRIOMwaDYY https://sites.google.com/site/peteszr1garage |
10-02-2009 | #7 |
Join Date: Aug 2008
Location: Houston 90 Red ZR-1
Posts: 2,320
|
Re: Permabond A136
Hehehe! Your like one of those guys that has a bomb bunker built under his house hording food and water for the next ten years ready for the Nuclear assault. One of these days I plan to make the 1'000 mile journey up there and hang out with the FBI bunch. I never thought I would ever have a reason to go back to the Chicago area. But that would be a good reason to me. I'm sure I'd have a freaken blast.
|
10-02-2009 | #8 |
Join Date: Dec 2003
Location: Chicagoland,IL
Posts: 2,679
|
Re: Permabond A136
Rick i almost spit my water all over my computer LMFAO
I'm only hording lt5 parts,i have an LT5 bunker Pete
__________________
'91 #1635 PoloGreen 350 LT5 11.09 @ 129.27 11.04 @ 128.86 474RWHP 400RWTQ http://www.youtube.com/watch?v=SFNFOhGGlR4 http://www.youtube.com/watch?v=ZlRIOMwaDYY https://sites.google.com/site/peteszr1garage |
10-02-2009 | #9 |
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,169
|
Re: Permabond A136
Yep.. I agree I have seen it
__________________
1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978 |
Thread Tools | |
Display Modes | |
|
|