ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 General Postings

Reply
 
Thread Tools Display Modes
Old 06-26-2009   #1
Paul Workman
 
Paul Workman's Avatar
 
Join Date: Nov 2007
Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri
Posts: 6,493
Default Taking the "Tour" at Bloomington?

So who all is going on the Bloomington Gold Tour? I figure on staging at 4ish, if no other takers. But, if the FBI and other Zs or ?? would like to arrive on mass, we should pick a spot to meet - a gas station or something close by. I'll have a look around today.

I've "rounded the corner" on my header install project - got the mutha@#$%& off FINALLY! (A slipped disc(??) in my back made for some serious agony - crawling in and out from under the car...That's my story an I'm stickin' towit! Beats the heck outta me how others managed to whip those stock headers/cats of in "no time" - a mystery to me!)

I've got the new bungs welded on (top), and now it's just nuts n bolts - far as the exhaust goes. Oh, yeah...That little matter of the fuel leaning out...And, what about the vibration? [sigh]. They may have to wait if I'm going to get it together in time to make the Tour.

Looks like an "all nighter" tonight, and it's been a while since I've done one of those (on a car!).

Ami is planning on bringing her 69 vert to the Tour. Hope to see aZ many as can make it. It'll be fun - always is!

P
__________________
Good carz, good food, good friendz = the best of timez!

90 #1202
"FBI" top end ported & relieved
Cam timing by "Pete the Greek"
Sans secondaries
Chip & dyno tuning by Haibeck Automotive
SW headers, X-pipe, MF muffs

Former Secretary, ZR-1 Net Registry
Paul Workman is offline   Reply With Quote
Old 06-26-2009   #2
Paul Workman
 
Paul Workman's Avatar
 
Join Date: Nov 2007
Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri
Posts: 6,493
Default Re: Taking the "Tour" at Bloomington?

A less than an overwhelming response!!!...(But, organizing any FBI shindig is like herding cats!)

Juuuuust in case anyone would like to make it a group fun event, there is a parking lot (pre-staging/gathering spot near the tour); the 3rd 5th(?) or was it a 5th 3rd(?) BANK parking lot on the NE corner of Randal Rd and IL Rt 38.

Using last year as a reference, if we arrived at the Kane Co admin lot (IL Rt. 38 and Peck Rd) close to 4PM Saturday, we will be near the front of the procession. It begins at 6 PM and usually winds up in 1 to 1-1/2 hours tops.

FYI,

P.
__________________
Good carz, good food, good friendz = the best of timez!

90 #1202
"FBI" top end ported & relieved
Cam timing by "Pete the Greek"
Sans secondaries
Chip & dyno tuning by Haibeck Automotive
SW headers, X-pipe, MF muffs

Former Secretary, ZR-1 Net Registry
Paul Workman is offline   Reply With Quote
Old 06-26-2009   #3
Vette92-97
 
Join Date: Jul 2008
Location: Abingdon, IL
Posts: 29
Default Re: Taking the "Tour" at Bloomington?

Where is the ZR-1 Registry parking at Bloomington Gold? I drove around and saw nothing for club parking.

Mike Boggs
Vette92-97 is offline   Reply With Quote
Old 06-28-2009   #4
-=Jeff=-
 
-=Jeff=-'s Avatar
 
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,169
Default Re: Taking the "Tour" at Bloomington?

Quote:
Originally Posted by Vette92-97 View Post
Where is the ZR-1 Registry parking at Bloomington Gold? I drove around and saw nothing for club parking.

Mike Boggs
There is none
__________________
1990 Corvette ZR-1 #1051
Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback
Late Model IH - Plenum
Coilovers - 4.10s
Custom Interior
NCM Lifetime Member #978
-=Jeff=- is offline   Reply With Quote
Old 06-28-2009   #5
Paul Workman
 
Paul Workman's Avatar
 
Join Date: Nov 2007
Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri
Posts: 6,493
Default Re: Taking the "Tour" at Bloomington?

We had a great time! Jeff and Ken were there as well as some friends from various clubs we always see at these gatherings. And, some of the local clubs had a spontaneous gathering at a local Irish B&G for some fine eating and a Irish brew. A great time was had.

I was driving Ami's 69 vert...



...and Jeff followed in his black Z. Tho I tried a couple times, there was no shaking 'im! Ami's car has the (350/350) L46/M-4/4.11s and is no slouch. But, every time I'd back off after a short couple gears, that Z was in my rear view mirror as tho I was pulling 'im w/ a rope!

Anyway, it was a great time (as always).

P.
__________________
Good carz, good food, good friendz = the best of timez!

90 #1202
"FBI" top end ported & relieved
Cam timing by "Pete the Greek"
Sans secondaries
Chip & dyno tuning by Haibeck Automotive
SW headers, X-pipe, MF muffs

Former Secretary, ZR-1 Net Registry

Last edited by Paul Workman; 06-28-2009 at 11:28 AM. Reason: add pic of Ami's C3
Paul Workman is offline   Reply With Quote
Old 06-28-2009   #6
-=Jeff=-
 
-=Jeff=-'s Avatar
 
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,169
Default Re: Taking the "Tour" at Bloomington?

Hey paul did you like those couple rolling burnouts in your rear view mirror??



Just think what porting will do
__________________
1990 Corvette ZR-1 #1051
Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback
Late Model IH - Plenum
Coilovers - 4.10s
Custom Interior
NCM Lifetime Member #978
-=Jeff=- is offline   Reply With Quote
Old 06-28-2009   #7
RiceEatingZR1
 
RiceEatingZR1's Avatar
 
Join Date: Feb 2004
Location: Aurora, IL
Posts: 309
Default Re: Taking the "Tour" at Bloomington?

Quote:
Originally Posted by -=Jeff=- View Post
There is none
I noticed that to and was disappointed :-(
__________________
-Shaun
1991 Charcoal Metallic ZR1 #730
[URL="http://www.cardomain.com/ride/2649606"]http://www.cardomain.com/ride/2649606[/URL]
[URL="http://community.webshots.com/user/shaun91zr1"][/URL]
[IMG]http://img.photobucket.com/albums/v211/RiceEatingZR1/Forum%20Sig/Sig1.gif[/IMG]
RiceEatingZR1 is offline   Reply With Quote
Old 06-28-2009   #8
-=Jeff=-
 
-=Jeff=-'s Avatar
 
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,169
Default Re: Taking the "Tour" at Bloomington?

Quote:
Originally Posted by RiceEatingZR1 View Post
I noticed that to and was disappointed :-(

It is because nobody from ANY Internet forums called to reserve their designated spots..

************* did not even call but due to the turn out they have had over the course of the last few years, they got their spot right when the advanced registration/club parking was closing.
__________________
1990 Corvette ZR-1 #1051
Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback
Late Model IH - Plenum
Coilovers - 4.10s
Custom Interior
NCM Lifetime Member #978
-=Jeff=- is offline   Reply With Quote
Old 06-28-2009   #9
Paul Workman
 
Paul Workman's Avatar
 
Join Date: Nov 2007
Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri
Posts: 6,493
Default Re: Taking the "Tour" at Bloomington?

Quote:
Originally Posted by -=Jeff=- View Post
Hey paul did you like those couple rolling burnouts in your rear view mirror??



Just think what porting will do


P.
__________________
Good carz, good food, good friendz = the best of timez!

90 #1202
"FBI" top end ported & relieved
Cam timing by "Pete the Greek"
Sans secondaries
Chip & dyno tuning by Haibeck Automotive
SW headers, X-pipe, MF muffs

Former Secretary, ZR-1 Net Registry
Paul Workman is offline   Reply With Quote
Old 06-28-2009   #10
Pete
 
Pete's Avatar
 
Join Date: Dec 2003
Location: Chicagoland,IL
Posts: 2,679
Default Re: Taking the "Tour" at Bloomington?

How was Dominic's BBQ at his house yesterday.

Pete
__________________
'91 #1635 PoloGreen 350 LT5
11.09 @ 129.27
11.04 @ 128.86
474RWHP 400RWTQ
http://www.youtube.com/watch?v=SFNFOhGGlR4
http://www.youtube.com/watch?v=ZlRIOMwaDYY
https://sites.google.com/site/peteszr1garage
Pete is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:53 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020