Fuel Filler Cap..OEM??? - ZR-1 Net Registry Forums

ZR1Vette · 05-05-2009

Could someone post a picture of the fuel tank OEM cap as you would see it when you open the fuel filler hatch. Not convinced mine is original, but rather a replacement. Is there any telling marks etc on the OEM version?

Thanks

GOLDCYLON · 05-05-2009

Well its not a locking gas cap. PM Sgreg he might have one in his bag of tricks

rebelz · 05-05-2009

This is from my '92
http://i263.photobucket.com/albums/i...1/DSCN2168.jpg

http://i263.photobucket.com/albums/i...1/DSCN2169.jpg

Yours may be different.

Rich

USAFPILOT · 05-05-2009

My OEM cap didn't pass emissions...I have a replacement I use for that purpose now.

ZR1Vette · 05-05-2009

Well...based on Rich's pics (and thank you for posting!) it appears I have an OEM cap after all....what threw me was the little 's' on the cap...
Whew...guess I can still consider NCRS

kirkstingray · 05-06-2009

Hi Michael, Take your cap off and look at the very last thread by the edge it should have a julian date code on it. Also from your picture it is a 90 cap. As for the person who posted the picture of his 92 cap it is wrong it's a 90.

Kirk

kirkstingray · 05-06-2009

Michael Join the NCRS and get the 1990-1991 Technical Information Manual and Judging Guide. Don't think twice about your car, it will top flight with out any problem. You have one of the best examples of a 1990 ZR-1 on the planet.

Kirk

rebelz · 05-06-2009

Quote:

Originally Posted by kirkstingray

Hi Michael, Take your cap off and look at the very last thread by the edge it should have a julian date code on it. Also from your picture it is a 90 cap. As for the person who posted the picture of his 92 cap it is wrong it's a 90.

Kirk

I didn't say the cap was a '92, I said, "This is from my '92." Right wrong or otherwise, the gas cap on my 1992 Yellow/Black ZR-1 #031, built in September 1991 is the original gas cap that was shipped with the car. The date code is 2 401. It wouldn't surprise me if the cap was made in 1990. Every 93, 94, & 95 ZR-1 had an engine that was built no later than 1993.

Rich
P.S. Julian should be capitalized.

05-05-2009	#1
ZR1Vette Join Date: Dec 2007 Location: Reston, Virginia Posts: 939	Fuel Filler Cap..OEM??? Could someone post a picture of the fuel tank OEM cap as you would see it when you open the fuel filler hatch. Not convinced mine is original, but rather a replacement. Is there any telling marks etc on the OEM version? Thanks __________________ Michael :cheers: [I][SIZE="2"]1990 RED on RED #566[/SIZE][/I] [I][SIZE="2"]WAZOO MEMBER[/I][/SIZE]

05-05-2009	#2
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,155	Re: Fuel Filler Cap..OEM??? Well its not a locking gas cap. PM Sgreg he might have one in his bag of tricks __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V

05-05-2009	#3
rebelz Join Date: Jul 2007 Location: Anchorage, AK Posts: 106	Re: Fuel Filler Cap..OEM??? This is from my '92 http://i263.photobucket.com/albums/i...1/DSCN2168.jpg http://i263.photobucket.com/albums/i...1/DSCN2169.jpg Yours may be different. Rich __________________ REBelZ '92 ZR-1 Yellow/Black #031

05-05-2009	#4
USAFPILOT Join Date: Aug 2007 Location: Spring TX Posts: 1,348	Re: Fuel Filler Cap..OEM??? My OEM cap didn't pass emissions...I have a replacement I use for that purpose now.

05-05-2009	#5
ZR1Vette Join Date: Dec 2007 Location: Reston, Virginia Posts: 939	Re: Fuel Filler Cap..OEM??? Well...based on Rich's pics (and thank you for posting!) it appears I have an OEM cap after all....what threw me was the little 's' on the cap... Whew...guess I can still consider NCRS __________________ Michael :cheers: [I][SIZE="2"]1990 RED on RED #566[/SIZE][/I] [I][SIZE="2"]WAZOO MEMBER[/I][/SIZE]

05-06-2009	#6
kirkstingray Join Date: Oct 2008 Location: riverdale maryland Posts: 123	Re: Fuel Filler Cap..OEM??? Hi Michael, Take your cap off and look at the very last thread by the edge it should have a julian date code on it. Also from your picture it is a 90 cap. As for the person who posted the picture of his 92 cap it is wrong it's a 90. Kirk

05-06-2009	#7
kirkstingray Join Date: Oct 2008 Location: riverdale maryland Posts: 123	Re: Fuel Filler Cap..OEM??? Michael Join the NCRS and get the 1990-1991 Technical Information Manual and Judging Guide. Don't think twice about your car, it will top flight with out any problem. You have one of the best examples of a 1990 ZR-1 on the planet. Kirk

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode