|
05-01-2009
|
#1 |
  
Join Date: Jun 2005
Location: pittsburgh
Posts: 4,632
|
replacing the amplifer relay
First off is this necessary? I've never heard of this needing to be replaced, i'm sure on a 19 year old car anythings possible.
Second how involved is replacing the relay? from what I can see it's under the drivers side dash so I'm assuming it's a pain in the ***
__________________
It's not the car, it's the people - Doug Johnson 90 r/r "KEYS ON" nick named "T.L.B" |
|
|
|
05-02-2009
|
#2 |
Join Date: Aug 2005
Location: Scottsdale, AZ
Posts: 2,452
|
Re: replacing the amplifer relay
|
|
|
|
|
05-02-2009
|
#3 | |
Join Date: Aug 2006
Location: Texas
Posts: 518
|
Re: replacing the amplifer relay
Quote:
Kevin, have no idea what your problem is but I would bet it's not the relay. If you have a volume problem in all speaker/amps it is the power module commonly known as the CDM. These go bad quite frequently in the Bose system and provide the power for nearly all functions of the Radio/CD head.
__________________
1991 ZR-1, Black, Black, # 541 |
|
|
|
|
|
05-02-2009
|
#4 |
  
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
|
Re: replacing the amplifer relay
I agree with Greg the CDM has gone bad. At least thats what the symptoms indicate
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director  91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
|
|
|
|
05-02-2009
|
#5 |
|
Join Date: Jun 2005
Location: pittsburgh
Posts: 4,632
|
Re: replacing the amplifer relay
i think the problem is the amps and not the relay. i'm going to get then redone and go from there
__________________
It's not the car, it's the people - Doug Johnson 90 r/r "KEYS ON" nick named "T.L.B" |
|
|
|
|
05-02-2009
|
#6 | |
 
Join Date: Nov 2006
Location: dayton,ohio
Posts: 425
|
Re: replacing the amplifer relay
Quote:
Is the CDM also the same as the radio receiver box with the preamps, or the radio control head, I have similar problem with faint volume out of all four.
__________________
[FONT=Comic Sans MS][COLOR=red]"I wanna go fast!!"[/COLOR][/FONT] [FONT=Comic Sans MS][COLOR=#ff0000]-- Ricky Bobby[/COLOR][/FONT] |
|
|
|
|
|
05-03-2009
|
#7 |
|
Guest
Posts: n/a
|
Re: replacing the amplifer relay
Good timing for me. My speakers all had sound before storage and restoration. Four years later now the fronts don't work (or I should say very soft sound). So I'm troublshooting these myself to get some sound from the fronts.
|
|
|
|
05-03-2009
|
#8 | |
|
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
|
Re: replacing the amplifer relay
Quote:
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
|
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
