|
12-04-2008
|
#1 |
|
Join Date: Jan 2008
Location: pa.
Posts: 8
|
d44 4.10 SOLD
have for sale dana 44 with4.10 r/p, this unit will need to be rebuilt with bearings/clutches, r/p and spiders are good shape no nick/chips at all case is also good no damage at all, case 550 + shipping email is geogolf@windstream.net pm or email me if interested, have sold several on cf so you will get a good unit geo
 
Last edited by 90vette; 01-15-2009 at 02:18 PM. |
|
|
|
12-04-2008
|
#2 |
 Join Date: Dec 2005
Location: Huntley IL
Posts: 170
|
Re: d44 4.10 with/without batwing
I am assuming The Ring & Pinion & Spiders Are In Good Shape And The Clutches & Bearings Need To Be Replaced Is That Correct ?
Bob |
|
|
|
|
12-04-2008
|
#3 |
|
Join Date: Jan 2008
Location: pa.
Posts: 8
|
Re: d44 4.10 with/without batwing
bob that is correct rp/spiders are ok, clutches could be also but for the price i would replace. i also would replace all bearings you sure as hell dont want to install and have to do over because of trying to save a few bucs, you zr1 guys seem to like 4.10 so that is why I posted here, my 90 vette is a auto with 3.54 that is about as high as you can go in auto. like i said sold several on cf, that is where most of my time is spent geo.
|
|
|
|
|
12-04-2008
|
#4 |
 
Join Date: Mar 2008
Location: Pendleton, IN
Posts: 669
|
Re: d44 4.10 with/without batwing
Email sent, I had to pass.
Last edited by ScottZ95ZR1; 01-06-2009 at 10:34 PM. |
|
|
|
01-06-2009
|
#5 |
|
Join Date: Jan 2008
Location: pa.
Posts: 8
|
Re: d44 4.10
ttt
|
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
