|
11-19-2008
|
#1 |
 
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,156
|
DjPatrick's old 90 ZR-1>>
Anyone need parts from it??
I know where it is and who owns it now.. Yes it is being parted out Frame was damaged
__________________
1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Shelby Series 1 - Wilwood Brakes Custom Interior NCM Lifetime Member #978 |
|
|
|
11-19-2008
|
#2 |
|
Join Date: Oct 2008
Location: tampa
Posts: 537
|
Re: DjPatrick's old 90 ZR-1>>
I'll Take first divs on:
DERM Module, if it's good with no airbag light. Coolant crossover tube Thermostat housing assembly |
|
|
|
|
11-19-2008
|
#3 |
|
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,156
|
Re: DjPatrick's old 90 ZR-1>>
I don't know if the bag went off
Also motor will be sold complete
__________________
1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Shelby Series 1 - Wilwood Brakes Custom Interior NCM Lifetime Member #978 |
|
|
|
|
11-19-2008
|
#4 |
Join Date: Apr 2006
Location: Ideho
Posts: 2,647
|
Re: DjPatrick's old 90 ZR-1>>
Refresher, what colors was it.
|
|
|
|
|
11-19-2008
|
#5 |
|
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,156
|
Re: DjPatrick's old 90 ZR-1>>
Black.. with black I think
I know the exterior was Black I know motor and trans with harness and ECM is selling complete
__________________
1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Shelby Series 1 - Wilwood Brakes Custom Interior NCM Lifetime Member #978 |
|
|
|
|
11-20-2008
|
#6 |
 Join Date: Dec 2007
Location: Bloomingdale, Il
Posts: 330
|
Re: DjPatrick's old 90 ZR-1>>
How about the secondary cacuum pump?
|
|
|
|
|
11-20-2008
|
#7 |
 
Join Date: Dec 2003
Location: Chicagoland,IL
Posts: 2,667
|
Re: DjPatrick's old 90 ZR-1>>
Are the half shafts aluminum?
If so how much? How much for the rear end? I'm interested. Pete
__________________
'91 #1635 PoloGreen 350 LT5 11.09 @ 129.27 11.04 @ 128.86 474RWHP 400RWTQ http://www.youtube.com/watch?v=SFNFOhGGlR4 http://www.youtube.com/watch?v=ZlRIOMwaDYY https://sites.google.com/site/peteszr1garage |
|
|
|
|
11-20-2008
|
#8 |
Join Date: Jun 2005
Location: Orange County, California
Posts: 75
|
Re: DjPatrick's old 90 ZR-1>>
How was it hit. Are any of the rear mouldings (rear bumper and quarters) salvageable. If so, I am interested.
Greg |
|
|
|
|
11-20-2008
|
#9 |
|
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,156
|
Re: DjPatrick's old 90 ZR-1>>
apparently there is interest
 Car is at vette2vette..
__________________
1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Shelby Series 1 - Wilwood Brakes Custom Interior NCM Lifetime Member #978 |
|
|
|
|
11-20-2008
|
#10 |
Join Date: Dec 2007
Location: Vernon Hills, IL
Posts: 262
|
Re: DjPatrick's old 90 ZR-1>>
Hey guys,
I can tell you that the airbag went off in the accident. The car was black on black and the rear end was badly scratched and the clamshell and almost the entire front end of the body is unusable. The front end was hit on the driver's side front tire and the gills exploding the battery. Hopefully you guys will put her to good use... 
Last edited by djpatrick35; 11-20-2008 at 07:11 PM. |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
