|
09-30-2008
|
#1 |
 
Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,194
|
This is for Goldcylon: Garage Facelift
Here is the before picture that I received so much crap about....it was while I was refinishing my Dymags....Goldcyclon apparently did not approve of the plain drywall.
  After:   Still need to stain the cabinets, and clean up alittle. Painting the floor is next. LGAFF 92 ZR1 #234 Last edited by LGAFF; 09-30-2008 at 10:02 PM. |
|
|
|
09-30-2008
|
#2 |
 
Join Date: Mar 2004
Location: Found Member
Posts: 4,346
|
Re: This is for Goldcylon: Garage Facelift
You selling the pink Vette ?
__________________
Frank Urbo. NCM Lifetime member # 982 Registry Founding # 237 |
|
|
|
|
09-30-2008
|
#3 |
|
Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,194
|
Re: This is for Goldcylon: Garage Facelift
No LT5 in the corner is going into it:
Power to weight ratio: LT5=600lbs Pink Vette=80lbs 680lbs/500hp Not bad, hope the engine heat doesn't cause it to melt at 250mph. Cupholder in the pink one is also better than in the Z! LGAFF 92 ZR1 #234 Pink LT5 C5 Corvette #001 |
|
|
|
|
09-30-2008
|
#4 |
  
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
|
Re: This is for Goldcylon: Garage Facelift
I noticed the red pegboard as well nice touch. Looks great !
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director  91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
|
|
|
|
09-30-2008
|
#5 |
Join Date: May 2005
Location: Leesburg, VA
Posts: 2,713
|
Re: This is for Goldcylon: Garage Facelift
Hahaha, you have a car cover for the little 'vette! That's great!
__________________
Bob Saveland Former owner of #2517 [IMG]http://a.random-image.net/aurora40/vette.jpg[/img] |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
