![]() |
#1 |
![]() Join Date: Jul 2004
Location: Sudbury, Ontario. Canada
Posts: 1,537
|
![]()
Hope someone can point me in the right direction here. I'm tring to install the SLP 'CLaw' intake I bought and the instructions have me confused. The instructions say to "remove the A.I.R Pump supply hose from the airbox and save the snap clamp". Only thing is when I removed the airbox there was no other hose attached and even looking in the FSM I can't seem to find out where the A.I.R pump is.
Looking at the intake there's a hole with a grommet on the right hand side and a length of tube, but nothing from the Z seems like it would hook up correctly. Any help would be appreciated. Thanks
__________________
1991 #1516 Black/Black davidmkelly.com Author of fast-paced, sci-fi thrillers. |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|