WTB Throttle linkage bracket screws - ZR-1 Net Registry Forums

07-23-2008

Looking for the two bolts/screws that hold the linkage bracket onto the throttle body itself. Anybody have any spares? These are the ones that go in from the driver side and have a Torx head on them, plus they are beveled to help set the linkage bracket.

Polo-1 · 07-24-2008

Show a picture please

If they are the ones I'm thinking of, late
70's early 80's smog carb from any SBC/BBC quadrajet.

07-23-2008	#1
Jeffvette Guest Posts: n/a	WTB Throttle linkage bracket screws Looking for the two bolts/screws that hold the linkage bracket onto the throttle body itself. Anybody have any spares? These are the ones that go in from the driver side and have a Torx head on them, plus they are beveled to help set the linkage bracket.

07-24-2008	#2
Polo-1 Join Date: Sep 2005 Location: Washington Posts: 955	Re: WTB Throttle linkage bracket screws Show a picture please If they are the ones I'm thinking of, late 70's early 80's smog carb from any SBC/BBC quadrajet.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode