|
07-09-2008
|
#1 |
Join Date: Dec 2007
Location: Fremont, CA
Posts: 3,088
|
Under plenum maintenance...................
Ive got the plenum off for injector replacement and before I get it back together what if any preventive maintenance should I look into?
|
|
|
|
07-09-2008
|
#2 | |
 
Join Date: Jan 2004
Location: Vancouver Washington
Posts: 236
|
Re: Under plenum maintenance...................
Quote:
Manfred E..... 91 #906  http://pnwzr1.net |
|
|
|
|
|
07-09-2008
|
#3 |
Join Date: Oct 2004
Location: Folsom CA
Posts: 1,658
|
Re: Under plenum maintenance...................
Don't forget to tighten oil box bolts.
Check, double check, check again, *ALL* vacuum fittings/lines/solenoids. If you don't already have a vacuum tester, get down to your local parts store and buy one. Check the PVC's and associated hosing, it's easier to get at with the plenum off. For some odd reason, mice seem to love to take up residence under the plenum. Be on the lookout for nesting material down around the starter. TomC
__________________
TomC '90ZR1 #792 Honorary Pirate [B]If it ain't FUN, you're doing something terribly WRONG. [/B] |
|
|
|
07-09-2008
|
#4 | |
|
Join Date: Dec 2007
Location: Fremont, CA
Posts: 3,088
|
Re: Under plenum maintenance...................
Quote:
|
|
|
|
|
|
07-10-2008
|
#5 | |
   
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,147
|
Re: Under plenum maintenance...................
Quote:
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director  91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
|
|
|
|
|
07-10-2008
|
#6 |
 Join Date: Jan 2007
Location: Florida
Posts: 240
|
Re: Under plenum maintenance...................
Check all of the injector housing bolts. When I pulled mine for porting I discovered that the inside row on both sides were finger tight. I understand this is not uncommon. While I was under the plenum I took small plastic wire ties to secure all the vacuum lines.
|
|
|
|
|
07-12-2008
|
#7 |
|
Join Date: Mar 2006
Location: Portsmouth, VA
Posts: 245
|
Re: Under plenum maintenance...................
Change the serpentine belt if it needs it or you don't know the last time it was replaced!
I totally agree with what Tom said about. Take everything off to look at the starter (down below the coils). Then remove the starter and clean out the drain hole. Best of luck! |
|
|
|
|
07-15-2008
|
#8 | |
|
Join Date: Dec 2007
Location: Fremont, CA
Posts: 3,088
|
Re: Under plenum maintenance...................
Quote:
|
|
|
|
|
|
07-15-2008
|
#9 | |
Join Date: Oct 2004
Location: Tennessee
Posts: 197
|
Re: Under plenum maintenance...................
Quote:
__________________
[IMG]http://i16.tinypic.com/4ig0b3a.jpg[/IMG] D. Mark Gentleman Farmer, U.S. Army-Retired LS3,LS6,LT1,LT5,L98,L82,L36,L79,L76 |
|
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
