speeds in gear - ZR-1 Net Registry Forums

Aurora40 · 06-08-2005

This is from Car and Driver? Or Road & Track? I can't recall which. But I thought someone might find it useful. Of course it's for a stock car:

Gear Ratio Mph/1000 rpm Max speed

1 2.68 8.1 56mph (7000 rpm)
2 1.80 12.0 84mph (7000 rpm)
3 1.31 16.5 116mph (7000 rpm)
4 1.00 21.6 151mph (7000 rpm)
5 0.75 28.8 179mph (6200 rpm)
6 0.50 43.2 142mph (3300 rpm)

It's funny how on a 6-speed, 2nd gear would be good to over 80mph. I think the L98 had a 3.33:1 axle ratio with the ZF? So with a 5,500 rpm redline for the L98, the ZR-1 should have had about a 4.36:1 ratio to have the same speeds at redline per gear.

It's funny the owners manual says not to shift into 1st above some certain speed. But makes no mention of not shifting into 2nd. Clearly because at any legal speed in the US, you could still drive safely in 2nd gear...

WB9MCW · 06-09-2005

it is funny how we have so much top end in the ZR-1...sure would be nice if we had an autobahn to really open her up in the gud old usa... here is a link for a couple of opportunities to do such!!!

http://www.openroadracing.com/html/mike_s_garage.html

http://www.texasmile.com/

and this is what happens when too much speed wins

06-08-2005	#1
Aurora40 Join Date: May 2005 Location: Leesburg, VA Posts: 2,713	speeds in gear This is from Car and Driver? Or Road & Track? I can't recall which. But I thought someone might find it useful. Of course it's for a stock car: Gear Ratio Mph/1000 rpm Max speed 1 2.68 8.1 56mph (7000 rpm) 2 1.80 12.0 84mph (7000 rpm) 3 1.31 16.5 116mph (7000 rpm) 4 1.00 21.6 151mph (7000 rpm) 5 0.75 28.8 179mph (6200 rpm) 6 0.50 43.2 142mph (3300 rpm) It's funny how on a 6-speed, 2nd gear would be good to over 80mph. I think the L98 had a 3.33:1 axle ratio with the ZF? So with a 5,500 rpm redline for the L98, the ZR-1 should have had about a 4.36:1 ratio to have the same speeds at redline per gear. It's funny the owners manual says not to shift into 1st above some certain speed. But makes no mention of not shifting into 2nd. Clearly because at any legal speed in the US, you could still drive safely in 2nd gear... __________________ Bob Saveland Former owner of #2517 [IMG]http://a.random-image.net/aurora40/vette.jpg[/img]

06-09-2005	#2
WB9MCW Join Date: Dec 2003 Location: McHenry, Il. Posts: 6,607	gud chart there it is funny how we have so much top end in the ZR-1...sure would be nice if we had an autobahn to really open her up in the gud old usa... here is a link for a couple of opportunities to do such!!! http://www.openroadracing.com/html/mike_s_garage.html http://www.texasmile.com/ and this is what happens when too much speed wins __________________ http://i119.photobucket.com/albums/o...9mcw/SIG-2.jpg http://i119.photobucket.com/albums/o128/wb9mcw/vcm.gif "The Budget should be balanced, the Treasury should be refilled, public debt should be reduced, the arrogance of officialdom should be tempered and controlled, and the assistance to foreign lands should be curtailed, lest Rome will become bankrupt. People must again learn to work instead of living on public assistance." - Cicero, 55 BC " We the people are the rightful masters of both Congress and the courts, not to overthrow the Constitution but to overthrow the men who pervert the Constitution." - Abraham Lincoln

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode