Oxygen Sensor Extension Harness - ZR-1 Net Registry Forums

Hammer · 03-03-2008

I am in the middle of the header install on the '91. I can't get to the wire harness except to plug something in. There just isn't any room down there. So I need to extend the O2 sensor harness on the right side about a 1 1/2'. I can probably get the weatherpack connectors from NAPA, but advice on the wire size,type and any other information (especially the no-no's) on this would be appreciated.

Nick · 03-03-2008

Quote:

Originally Posted by Hammer

I am in the middle of the header install on the '91. I can't get to the wire harness except to plug something in. There just isn't any room down there. So I need to extend the O2 sensor harness on the right side about a 1 1/2'. I can probably get the weatherpack connectors from NAPA, but advice on the wire size,type and any other information (especially the no-no's) on this would be appreciated.

John, you can get the OEM weatherpack connectors through NAPA. When I built my 02 extensions I went to NAPA, and they ordrered them for me. I picked them up the same day right down the street at an AC Delco parts warehouse (lucky for me it was right in town!). I might have an extra extension laying around. Seems to me I bought an extra one. Let me check tonight and get back to you. Maybe save you some time and energy.

Hammer · 03-03-2008

Quote:

Originally Posted by Nick

John, you can get the OEM weatherpack connectors through NAPA. When I built my 02 extensions I went to NAPA, and they ordrered them for me. I picked them up the same day right down the street at an AC Delco parts warehouse (lucky for me it was right in town!). I might have an extra extension laying around. Seems to me I bought an extra one. Let me check tonight and get back to you. Maybe save you some time and energy.

PM me the phone number your at and I'll get right to you. I'd like to get this done today if possible.

Thanks

Nick · 03-03-2008

John, good talking to you this morning. It sounds like you are well on your way to completing the header install. Have fun!

Hammer · 03-03-2008

Many thanks to Jeff, Nick and Marc for their timely return of phone calls.

I have made a harness to extend the O2 Sensor wiring. All the parts were available at NAPA and it was easy to make. A better crimping tool would have been nice, but mine worked.

A couple of pointers for anyone doing this from Marc:
1. The weatherall connectors are the way to go, there shouldn't be any issues doing the extension this way.

2. Marc said you can extend the existing harness but you have to use crimp connectors. If you try it by soldering and taping the connections the O2 Sensors won't work.

3. You want to use 20 guage wire for this job.

Now on to the completion of the job.

Hammer · 03-04-2008

Started the car last night but haven't driven it yet, so we'll see about drivability this weekend.

Demps · 03-04-2008

It's about time. How can you wait until this weekend? That car will be totally different now. Can't wait to hear your thoughts. Ted

Oh, it only gets more expensive from here.....

Hammer · 03-04-2008

Quote:

Originally Posted by Demps

It's about time. How can you wait until this weekend? That car will be totally different now. Can't wait to hear your thoughts. Ted

Oh, it only gets more expensive from here.....

Got to put the fenderwells back in and finish cleaning it, wheels and such. I will post once I get 'er done.

Polo-1 · 03-05-2008

[QUOTE=Demps]

Oh, it only gets more expensive from here.....

Tell me about it.......

Jeff just keeps calling.........We are going to need more money

03-05-2008

Quote:

Originally Posted by Polo-1

Looks nice and f'd up. Did you thank Mike?

03-03-2008	#1
Hammer Join Date: Apr 2006 Location: Ideho Posts: 2,653	Oxygen Sensor Extension Harness I am in the middle of the header install on the '91. I can't get to the wire harness except to plug something in. There just isn't any room down there. So I need to extend the O2 sensor harness on the right side about a 1 1/2'. I can probably get the weatherpack connectors from NAPA, but advice on the wire size,type and any other information (especially the no-no's) on this would be appreciated. __________________ [I][FONT=Comic Sans MS]John Boyd[/FONT][/I] [I][FONT=Comic Sans MS][SIZE=1]Ideho[/SIZE][/FONT][/I] [FONT=Comic Sans MS][SIZE=1][I]2015 ZL1 [/I][I]Camaro #1121 BLACK/BLACK 6 SPD (540 RWHP)[/I][/SIZE][/FONT] [I][FONT=Comic Sans MS][SIZE=1]1991 ZR-1 #458 [COLOR=red]RED/[/COLOR][COLOR=black]BLACK 72[/COLOR]k miles ([B][COLOR=red]SOLD[/COLOR][/B]) 1991 ZR-1 #473 [COLOR=red]RED/[/COLOR][COLOR=black]BLACK [/COLOR]37k miles ([B][COLOR=red]SOLD[/COLOR][/B])[/SIZE][/FONT][/I]

03-03-2008	#4
Nick Join Date: Jul 2005 Location: Auburn, Washington Posts: 586	Re: Oxygen Sensor Extension Harness John, good talking to you this morning. It sounds like you are well on your way to completing the header install. Have fun! __________________ Nick ZR-1 Net Registry Founding Member #32 - lapsed...

03-03-2008	#5
Hammer Join Date: Apr 2006 Location: Ideho Posts: 2,653	Re: Oxygen Sensor Extension Harness Many thanks to Jeff, Nick and Marc for their timely return of phone calls. I have made a harness to extend the O2 Sensor wiring. All the parts were available at NAPA and it was easy to make. A better crimping tool would have been nice, but mine worked. A couple of pointers for anyone doing this from Marc: 1. The weatherall connectors are the way to go, there shouldn't be any issues doing the extension this way. 2. Marc said you can extend the existing harness but you have to use crimp connectors. If you try it by soldering and taping the connections the O2 Sensors won't work. 3. You want to use 20 guage wire for this job. Now on to the completion of the job. __________________ [I][FONT=Comic Sans MS]John Boyd[/FONT][/I] [I][FONT=Comic Sans MS][SIZE=1]Ideho[/SIZE][/FONT][/I] [FONT=Comic Sans MS][SIZE=1][I]2015 ZL1 [/I][I]Camaro #1121 BLACK/BLACK 6 SPD (540 RWHP)[/I][/SIZE][/FONT] [I][FONT=Comic Sans MS][SIZE=1]1991 ZR-1 #458 [COLOR=red]RED/[/COLOR][COLOR=black]BLACK 72[/COLOR]k miles ([B][COLOR=red]SOLD[/COLOR][/B]) 1991 ZR-1 #473 [COLOR=red]RED/[/COLOR][COLOR=black]BLACK [/COLOR]37k miles ([B][COLOR=red]SOLD[/COLOR][/B])[/SIZE][/FONT][/I]

03-04-2008	#6
Hammer Join Date: Apr 2006 Location: Ideho Posts: 2,653	Re: Oxygen Sensor Extension Harness Started the car last night but haven't driven it yet, so we'll see about drivability this weekend. __________________ [I][FONT=Comic Sans MS]John Boyd[/FONT][/I] [I][FONT=Comic Sans MS][SIZE=1]Ideho[/SIZE][/FONT][/I] [FONT=Comic Sans MS][SIZE=1][I]2015 ZL1 [/I][I]Camaro #1121 BLACK/BLACK 6 SPD (540 RWHP)[/I][/SIZE][/FONT] [I][FONT=Comic Sans MS][SIZE=1]1991 ZR-1 #458 [COLOR=red]RED/[/COLOR][COLOR=black]BLACK 72[/COLOR]k miles ([B][COLOR=red]SOLD[/COLOR][/B]) 1991 ZR-1 #473 [COLOR=red]RED/[/COLOR][COLOR=black]BLACK [/COLOR]37k miles ([B][COLOR=red]SOLD[/COLOR][/B])[/SIZE][/FONT][/I]

03-04-2008	#7
Demps Join Date: Jan 2006 Location: Niceville Posts: 998	Re: Oxygen Sensor Extension Harness It's about time. How can you wait until this weekend? That car will be totally different now. Can't wait to hear your thoughts. Ted Oh, it only gets more expensive from here.....

03-05-2008	#9
Polo-1 Join Date: Sep 2005 Location: Washington Posts: 955	Re: Oxygen Sensor Extension Harness [QUOTE=Demps] Oh, it only gets more expensive from here..... Tell me about it....... Jeff just keeps calling.........We are going to need more money

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode