oem fuel injectors finally gave up

[lbszr]

Guess it's time for Accel's. Getting ready to reinstall oem inj. so checked resistance and found one at 7 and one at 11 below limits, so thought would do the oven method with 160 degrees, now there's 5 more bad when hot, but fall right into perfect limits when cooled down.

It seemed like it was a little rougher running last fall especially when cold, but ran good overall, accelerated smooth in 6th gear, so they must not of totally failed, but on the way.

Any negatives with Accel's out there?

So far only one bad report.

[lbszr]

Thanks for the report, guess I'll give them a try .

[tccrab]

I've had the Accels in my '90 for over a year now with no problems.

Tom

[Nick]

I'll be installing the Accels shortly. I'm done with the stockers!

Originally Posted by Nick

I'll be installing the Accels shortly. I'm done with the stockers!

You want to install them the same weekend we are doing Davids trans?

[Nick]

Originally Posted by Jeffvette

You want to install them the same weekend we are doing Davids trans?

[Bell Curve]

Originally Posted by Jeffvette

So far only one bad report.

What was the complaint with them

Originally Posted by Bell Curve

What was the complaint with them

From the other place.

Originally Posted by ZR1Rob

FWIW - I replaced the originals with accels on my '91. 2 years and 15K miles later, I put RC's on them. I dont like accels, they leaked. RC's are much better - 5 yrs now and 30K later they are still great - just had them checked last summer.

Apparently they were the old style non stainless injector though.