|
03-01-2008
|
#1 |
 
Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,194
|
63=64 and Head question
I was dissapointed when I tried match my plenum to the TB, I have a 63MM DRM TB, and noticed that they did not port match the intake, it was 60MM. So I opened up the intake to 63MM. Dominic came over today so before he got here I matched up TB to the intake and there was still a difference. After remeasuring the intake, I measured the TB again....difference is the TB is actually 64MM.
Also Dominic and I noticed that the head surface at the IH was machined right at the lip, just slightly. Is this from the factory, I would assume so. LGAFF 92 ZR1 #234 |
|
|
|
03-01-2008
|
#2 | |
|
Guest
Posts: n/a
|
Re: 63=64 and Head question
Quote:
|
|
|
|
|
03-02-2008
|
#3 | |
 
Join Date: Dec 2003
Location: Chicagoland,IL
Posts: 2,679
|
Re: 63=64 and Head question
Quote:
 Jeff,did you get my picture e-mails Pete
__________________
'91 #1635 PoloGreen 350 LT5 11.09 @ 129.27 11.04 @ 128.86 474RWHP 400RWTQ http://www.youtube.com/watch?v=SFNFOhGGlR4 http://www.youtube.com/watch?v=ZlRIOMwaDYY https://sites.google.com/site/peteszr1garage |
|
|
|
|
|
03-02-2008
|
#4 | |
|
Guest
Posts: n/a
|
Re: 63=64 and Head question
Quote:
|
|
|
|
|
03-02-2008
|
#5 |
|
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,708
|
Re: 63=64 and Head question
I happened to bring my 63mm TB to Lee's place and it also measured 64mm. Hopefully, 2 more plenum runners and the TB opening finishes off my manifold/IH porting project. Next, its the cylinder head match.
Last edited by XfireZ51; 03-02-2008 at 10:50 AM. |
|
|
|
|
03-02-2008
|
#6 |
|
Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,194
|
Re: 63=64 and Head question
Quote:
Originally Posted by Pete Jeff,did you get my picture e-mails Pete Yes I did Pete. Been shopping the items around. Jeff and Pete would you like to share with the rest of the class? With these two minds, sounds like something is brewing! LGAFF |
|
|
|
|
03-02-2008
|
#7 | |
|
Join Date: Dec 2003
Location: Chicagoland,IL
Posts: 2,679
|
Re: 63=64 and Head question
Quote:
We're working on the 454ci LT5 project.  Pete
__________________
'91 #1635 PoloGreen 350 LT5 11.09 @ 129.27 11.04 @ 128.86 474RWHP 400RWTQ http://www.youtube.com/watch?v=SFNFOhGGlR4 http://www.youtube.com/watch?v=ZlRIOMwaDYY https://sites.google.com/site/peteszr1garage |
|
|
|
|
|
03-02-2008
|
#8 |
|
Join Date: Oct 2007
Location: lone pine and mammoth lakes ca.
Posts: 544
|
Re: 63=64 and Head question
wow , good luck you 2 .petes great head developement and jeffs expertise on the lt-5 sure to be a winner . i can smell the rubber burning now
|
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
