ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 Technical Postings
Reload this Page Exhaust changes causes problems
Register FAQ Calendar Search Today's Posts Mark Forums Read

Reply
Page 1 of 13 1 234511 Last »
 
Thread Tools Display Modes
Old 01-15-2008   #1
rogerzr1
 
rogerzr1's Avatar
 
Join Date: Sep 2007
Location: Georgia
Posts: 231
Default Exhaust changes causes problems
I just replaced the stock exhaust with B&B and X pipe. The car seems to stumble in low rpm and hesitates a little during acceleration. The car acts like it wants to backfire, but doesn't. Any ideas?
__________________
Roger Miller
91 ZR-1 #391
rogerzr1 is offline   Reply With Quote
Old 01-15-2008   #2
GOLDCYLON
 
GOLDCYLON's Avatar
 
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
Default Re: Exhaust changes causes problems
Quote:
Originally Posted by rogerzr1
I just replaced the stock exhaust with B&B and X pipe. The car seems to stumble in low rpm and hesitates a little during acceleration. The car acts like it wants to backfire, but doesn't. Any ideas?
Did you remove the factory cats?
__________________
GOLDCYLON - 91 ZR-1 #2014
GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's)
GOLDCYLON - 11 CTS-V


Arizona State Director




91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat

90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat

11 RED/GREY CTS-V
GOLDCYLON is offline   Reply With Quote
Old 01-15-2008   #3
rogerzr1
 
rogerzr1's Avatar
 
Join Date: Sep 2007
Location: Georgia
Posts: 231
Default Re: Exhaust changes causes problems
Quote:
Originally Posted by GOLDCYLON
Did you remove the factory cats?
No. The factory cats are still in place.
__________________
Roger Miller
91 ZR-1 #391
rogerzr1 is offline   Reply With Quote
Old 01-15-2008   #4
GOLDCYLON
 
GOLDCYLON's Avatar
 
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
Default Re: Exhaust changes causes problems
Quote:
Originally Posted by rogerzr1
No. The factory cats are still in place.
Hmm well if they were I would suggest a chip change however since they are not Im assuming a stock chip?
__________________
GOLDCYLON - 91 ZR-1 #2014
GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's)
GOLDCYLON - 11 CTS-V


Arizona State Director




91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat

90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat

11 RED/GREY CTS-V
GOLDCYLON is offline   Reply With Quote
Old 01-15-2008   #5
rogerzr1
 
rogerzr1's Avatar
 
Join Date: Sep 2007
Location: Georgia
Posts: 231
Default Re: Exhaust changes causes problems
Quote:
Originally Posted by GOLDCYLON
Hmm well if they were I would suggest a chip change however since they are not Im assuming a stock chip?
I have a Chip from Marc Haibeck. It was tuned for a stock setup. Would an exhaust change like this require a reprograming? I figured I wouldn't need a reprogram until I put headers on it.
__________________
Roger Miller
91 ZR-1 #391
rogerzr1 is offline   Reply With Quote
Old 01-15-2008   #6
Hammer
 
Hammer's Avatar
 
Join Date: Apr 2006
Location: Ideho
Posts: 2,653
Talking Re: Exhaust changes causes problems
I am getting ready to put headers on. Watson's I think. I have the Haibeck chip and am expecting to have to have it reprogrammed. I have heard I can expect backfiring without cats but that can be programmed out.

So far:
K&N with Open lid
Flowmaster Catback
Haibeck Chip

Once the headers are on (a couple weeks) I'll post the results.
__________________
[I][FONT=Comic Sans MS]John Boyd[/FONT][/I]
[I][FONT=Comic Sans MS][SIZE=1]Ideho[/SIZE][/FONT][/I]
[FONT=Comic Sans MS][SIZE=1][I]2015 ZL1 [/I][I]Camaro #1121 BLACK/BLACK 6 SPD (540 RWHP)[/I][/SIZE][/FONT]
[I][FONT=Comic Sans MS][SIZE=1]1991 ZR-1 #458 [COLOR=red]RED/[/COLOR][COLOR=black]BLACK 72[/COLOR]k miles ([B][COLOR=red]SOLD[/COLOR][/B])
1991 ZR-1 #473 [COLOR=red]RED/[/COLOR][COLOR=black]BLACK [/COLOR]37k miles ([B][COLOR=red]SOLD[/COLOR][/B])[/SIZE][/FONT][/I]
Hammer is offline   Reply With Quote
Old 01-15-2008   #7
GOLDCYLON
 
GOLDCYLON's Avatar
 
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
Default Re: Exhaust changes causes problems
Quote:
Originally Posted by rogerzr1
I have a Chip from Marc Haibeck. It was tuned for a stock setup. Would an exhaust change like this require a reprograming? I figured I wouldn't need a reprogram until I put headers on it.

I would not think so with the cats one I would ask Marc if it is his chip
__________________
GOLDCYLON - 91 ZR-1 #2014
GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's)
GOLDCYLON - 11 CTS-V


Arizona State Director




91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat

90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat

11 RED/GREY CTS-V
GOLDCYLON is offline   Reply With Quote
Old 01-15-2008   #8
bradslt5
 
Join Date: Oct 2007
Location: lone pine and mammoth lakes ca.
Posts: 544
Default Re: Exhaust changes causes problems
I believe that mark pulls just a little fuel out of his base prom. . if you got the 3in bandb you could be running just alittle lean . are you using 91 or 93 oct fuel . also remember that this time of year they put more ethanol in the fuel this is a winter thing .
bradslt5 is offline   Reply With Quote
Old 01-15-2008   #9
bradslt5
 
Join Date: Oct 2007
Location: lone pine and mammoth lakes ca.
Posts: 544
Default Re: Exhaust changes causes problems
also you might want to ck your fuel pressure to see if everything is ok . how long has it been since you changed your fuel filter ? hopes this helps
bradslt5 is offline   Reply With Quote
Old 01-15-2008   #10
rogerzr1
 
rogerzr1's Avatar
 
Join Date: Sep 2007
Location: Georgia
Posts: 231
Default Re: Exhaust changes causes problems
Quote:
Originally Posted by bradslt5
also you might want to ck your fuel pressure to see if everything is ok . how long has it been since you changed your fuel filter ? hopes this helps
Good idea. I just got the car back in July. How hard is it to change the fuel filter?
__________________
Roger Miller
91 ZR-1 #391
rogerzr1 is offline   Reply With Quote
Reply
Page 1 of 13 1 234511 Last »

« Previous Thread | Next Thread »
Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 01:04 AM.

Contact Us - ZR-1 Net Registry - Archive - Privacy Statement - Top

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020