ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 Technical Postings

Reply
 
Thread Tools Display Modes
Old 09-13-2007   #1
DaveK
 
Join Date: Jul 2004
Location: Sudbury, Ontario. Canada
Posts: 1,538
Default Rattle - heat shields?

I seem to have developed a rattle (well my Z, not me personally!). It's not there when I immediately start up from cold but comes on as the engine warms up a bit. It also only seems to happen while idling, as soon as I lift the revs it dissappears.

From searching the forum it seems like it might be heat shields on the exhaust? Where abouts are these? On the headers? Underneath?

Would appreciate any pointers.

thanks

Dave
__________________
1991 #1516 Black/Black

davidmkelly.com

"Speed is often confused with insight." - Johan Cruijff
DaveK is offline   Reply With Quote
Old 09-13-2007   #2
bobbyhi
 
bobbyhi's Avatar
 
Join Date: Jul 2005
Location: Mendota Heights, MN. 55120
Posts: 984
Default Re: Rattle - heat shields?

Dave - I think it is from all of the loonies and toonies rolling around inside. Check under the seats
__________________
Bob Anderson
1990 #2405 White/Gray
Haibeck chip,4:09 gears,Power Effects Exhaust,5 spoke chrome,C5 brakes,49th Street rockers,K&N,Hurst,Headers,Upper & lower ported

Minnesota State Director
Founding Member #19
bobbyhi is offline   Reply With Quote
Old 09-13-2007   #3
DaveK
 
Join Date: Jul 2004
Location: Sudbury, Ontario. Canada
Posts: 1,538
Default Re: Rattle - heat shields?

Quote:
Originally Posted by bobbyhi
Dave - I think it is from all of the loonies and toonies rolling around inside. Check under the seats
Good thinking Bob - I'll do that! Congrats on your new engraved water pipes
__________________
1991 #1516 Black/Black

davidmkelly.com

"Speed is often confused with insight." - Johan Cruijff
DaveK is offline   Reply With Quote
Old 09-17-2007   #4
Belsy
 
Belsy's Avatar
 
Join Date: Nov 2006
Location: DeBary , Fl.
Posts: 119
Default Re: Rattle - heat shields?

Check the Cats!!! Mine broke up inside and rattled at idle, hit them with a rubber hammer if they rattle empty them, do not let pieces pull back into motor!!!!
__________________
Gene in Fl. :handshak:
______________
95 ZR-1 #399
Dunn heads
X-pipe w/3"
misc. mods
Belsy is offline   Reply With Quote
Old 09-17-2007   #5
DaveK
 
Join Date: Jul 2004
Location: Sudbury, Ontario. Canada
Posts: 1,538
Default Re: Rattle - heat shields?

Thanks for that Gene. I tried to isolate where the sound was coming from last Friday evening and the bloody thing refused to make a noise. I also went on 2 cruises over the weekend and there was nothing.

These cars are definitely female - nothing else is so bloody temperamental!

__________________
1991 #1516 Black/Black

davidmkelly.com

"Speed is often confused with insight." - Johan Cruijff
DaveK is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:43 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020