Oil pan fastener torque - ZR-1 Net Registry Forums

tooltime47 · 09-02-2007

I have a little seepage that appears to be coming from around the oil pan gasket. Does anyone know the proper fastener torque? I don't want to over tighten.

tomtom72 · 09-02-2007

I think it's 20nM......I think

tooltime47 · 09-02-2007

Quote:

Originally Posted by tomtom72

I think it's 20nM......I think

Thanks Tomtom. That sounds about right. They are pretty small bolts.

lbszr · 09-03-2007

Front screws 106 lb.in. 12nm. bolts 23 lb.ft. 31nm in sequence from the gm manual supplement, That newton stuff is crazy though

09-02-2007	#1
tooltime47 Join Date: Jul 2007 Location: Essexville, Michigan Posts: 12	Oil pan fastener torque I have a little seepage that appears to be coming from around the oil pan gasket. Does anyone know the proper fastener torque? I don't want to over tighten. __________________ [B][I]Dave Havercamp 91 Black/Gray ZR1 06 Red/Black Convertible[/I][/B]

09-02-2007	#2
tomtom72 Join Date: Dec 2004 Location: Jacksonville, FL USA Posts: 4,645	Re: Oil pan fastener torque I think it's 20nM......I think __________________ 1990 ZR-1, Black/grey, #2233, stock. ZR-1 Net Reg Founding Member #316 & NCM member

09-03-2007	#4
lbszr Join Date: Nov 2006 Location: dayton,ohio Posts: 425	Re: Oil pan fastener torque Front screws 106 lb.in. 12nm. bolts 23 lb.ft. 31nm in sequence from the gm manual supplement, That newton stuff is crazy though __________________ [FONT=Comic Sans MS][COLOR=red]"I wanna go fast!!"[/COLOR][/FONT] [FONT=Comic Sans MS][COLOR=#ff0000]-- Ricky Bobby[/COLOR][/FONT]

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode