ACCEL injectors - ZR-1 Net Registry Forums

george henry · 07-21-2007

Greetings all. Just wondering if anyone has a comment on this:Just read Roger E's post about using the outer slot on the injector for the clip to the fuel rail (the slot next to the o-ring?) I just pushed them into the rail and used the slots that look like they were made for the clip. There were no leaks and it runs fine. Does anybody know how much difference this makes? Should I worry?

Ccmano · 07-21-2007

Don't worry about it, you did it right. Did mine the same way...

Hans

george henry · 07-23-2007

Thanks Hans. I'll sleep better now. Looks like our cars were born very close together.

George

Belsy · 07-25-2007

Quote:

Originally Posted by Ccmano

Don't worry about it, you did it right. Did mine the same way...

Hans

Noticed you have the coolant bypass, how is it and did you do the conversion yourself?
Gene in Fl.

8upZR1 · 07-26-2007

Are these accel injectors replacements for the primaries?

tomtom72 · 07-27-2007

Quote:

Originally Posted by 8upZR1

Are these accel injectors replacements for the primaries?

Accel sells the full set now, s/s to boot.

Ccmano · 07-27-2007

The Accels fit both the primaries and the secondaries. Marc Haibeck swears by them, I was just over at his shop last week. He also confirmed that they are stainless steel.

The bypass is relatively simple. Just undo the coolant hoses that go to either side of the throttle housing. Remove the hoses and run a single hose from one coolant line to the other under the front of the plenum.

I'll snap a picture of mine and post it so you can see.
Hans

8upZR1 · 07-28-2007

How can the Accel injectors replace both primary and secondary when they are so different where they mount into the injector housing? Do the primaries come with a sleeve or something to take up the extra space?

Ccmano · 07-28-2007

Quote:

Originally Posted by 8upZR1

How can the Accel injectors replace both primary and secondary when they are so different where they mount into the injector housing? Do the primaries come with a sleeve or something to take up the extra space?

The primaries mount and seal into the throttle housing on the lower section of the injector where the o-ring is. The secondaries mount in to the throttle housing on the wider area of the injector above where the o-ring is and seal utilizing a larger o-ring that mounts into the housing itself.
The tops all mount and seal the same way.

Jagdpanzer · 07-28-2007

Do the same PN ACCEL injectors work in all ZR-1 engine model years?

07-21-2007	#1
george henry Join Date: Aug 2006 Location: San Diego, CA Posts: 24	ACCEL injectors Greetings all. Just wondering if anyone has a comment on this:Just read Roger E's post about using the outer slot on the injector for the clip to the fuel rail (the slot next to the o-ring?) I just pushed them into the rail and used the slots that look like they were made for the clip. There were no leaks and it runs fine. Does anybody know how much difference this makes? Should I worry? __________________ 1990 #1507 Black/Grey/flowmaster-DRM chip

07-21-2007	#2
Ccmano Join Date: Jun 2006 Location: Sparks, NV Posts: 2,852	Re: ACCEL injectors Don't worry about it, you did it right. Did mine the same way... Hans __________________ 90'ZR-1 #1461 Red/Black Ported Intake, Degreed Cams, OBX Headers & Exhaust, Fidanza FW, Secondary Delete, Custom tune, C6 GS Wheels. Sold 08 C6 Z51 Crystal Red Metallic Sold Vararam Intake, Tune, Sold 05 C6 Z51 Red/Black Sold 90'ZR-1 #1723 Black/Gray Sold but not forgotten 91' Z51 L98 White Vert. My First, you always remember your first. Sold.

07-23-2007	#3
george henry Join Date: Aug 2006 Location: San Diego, CA Posts: 24	Re: ACCEL injectors Thanks Hans. I'll sleep better now. Looks like our cars were born very close together. George __________________ 1990 #1507 Black/Grey/flowmaster-DRM chip

07-26-2007	#5
8upZR1 Join Date: Jun 2006 Location: Thunderbolt, Ga. Posts: 253	Re: ACCEL injectors Are these accel injectors replacements for the primaries? __________________ IT IS THE FATE OF THE INNOCENT TO MEET WITH DEATH!!!

07-27-2007	#7
Ccmano Join Date: Jun 2006 Location: Sparks, NV Posts: 2,852	Re: ACCEL injectors The Accels fit both the primaries and the secondaries. Marc Haibeck swears by them, I was just over at his shop last week. He also confirmed that they are stainless steel. The bypass is relatively simple. Just undo the coolant hoses that go to either side of the throttle housing. Remove the hoses and run a single hose from one coolant line to the other under the front of the plenum. I'll snap a picture of mine and post it so you can see. Hans __________________ 90'ZR-1 #1461 Red/Black Ported Intake, Degreed Cams, OBX Headers & Exhaust, Fidanza FW, Secondary Delete, Custom tune, C6 GS Wheels. Sold 08 C6 Z51 Crystal Red Metallic Sold Vararam Intake, Tune, Sold 05 C6 Z51 Red/Black Sold 90'ZR-1 #1723 Black/Gray Sold but not forgotten 91' Z51 L98 White Vert. My First, you always remember your first. Sold.

07-28-2007	#8
8upZR1 Join Date: Jun 2006 Location: Thunderbolt, Ga. Posts: 253	Re: ACCEL injectors How can the Accel injectors replace both primary and secondary when they are so different where they mount into the injector housing? Do the primaries come with a sleeve or something to take up the extra space? __________________ IT IS THE FATE OF THE INNOCENT TO MEET WITH DEATH!!!

07-28-2007	#10
Jagdpanzer Join Date: Apr 2007 Location: Northern VA Posts: 2,661	Re: ACCEL injectors Do the same PN ACCEL injectors work in all ZR-1 engine model years?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode